/vr/ - Retro Games

>>10693916
I'm >>10686107 above, I'm using an old 3B+ and I can tell you even with barebones lakka it's not quite strong enough to run N64 games at full speed, but everything else I've tested works fine (PSX and below, some arcade), if not always using the most accurate cores. You need to do some basic text editor config to get it to output 240p over composite and you need to download a shader >>10687161 to take care of the borders on 95% of games. It's not exactly difficult but it isn't plug and play. Only other thing I can tell you is I'm not using the TRRS jack, I soldered my own composite jack onto the test pads on the underside of the board, as that gives the cleanest output you can get from it. I'm about to set my Pi4 up the same way as it should be enough to get fullspeed N64 and maybe even use BeetlePSX for PGXP. Whether that's 'good enough' is entirely up to you, though.

For your other two questions, whatever works and has the inputs you need is probably good enough. If you're going to buy it, at least ask them to turn it on and feed something to it if they can.