[ 3 / biz / cgl / ck / diy / fa / ic / jp / lit / sci / vr / vt ] [ index / top / reports ] [ become a patron ] [ status ]
2023-11: Warosu is now out of extended maintenance.

/diy/ - Do It Yourself

View post   
File: 1.81 MB, 2160x3060, Computer Hardware.jpg [View same] [iqdb] [saucenao] [google]
535951 No.535951 [Reply] [Original]

Hey /adv/, I might have run into a snag with my computer rig i'm building. I think the motherboard might be too big for the case, but i'm not too sure. The board measures 10.4 in x 2.7 in x 12.9 in, and the inside of the case measures 20.6 in x 9 in x 19 in. The thing i'm worried about are the ports on the motherboard not fitting through the rear of the computer. The motherboard is an ASUS M599FX Pro and the case is a CM Storm Enforcer. Any help would be greatly appreciated.

>> No.535954

Shameless self-bump

>> No.535955

>>>/g/

Also this is a slow board, dont bump for like 24 hours

>> No.535957
File: 188 KB, 792x1112, 45 hit combo.jpg [View same] [iqdb] [saucenao] [google]
535957

>>535955
Ok thanks, I don't usually go on here. Have a funny

>> No.535967

>>535951

just cross reference board size standard with your cases

if both are ATX then you're golden

>> No.535997

>>535967
That. i know of that motherboard, i used an m5a99x evo for my girlfriend's build and as far as i know all m5a99 models are ATX. unless you got a weirdly shaped case or a small mini case you should be fine.