[ 3 / biz / cgl / ck / diy / fa / ic / jp / lit / sci / vr / vt ] [ index / top / reports ] [ become a patron ] [ status ]
2023-11: Warosu is now out of extended maintenance.

/diy/ - Do It Yourself


View post   

File: 434 KB, 1500x1000, 5DFD60B4-98B9-4D2C-8251-299C5A742D30.jpg [View same] [iqdb] [saucenao] [google]
2602977 No.2602977 [Reply] [Original]

I have some empty land in a warm climate earthquake and hurricane zone and I want to put an off grid cabin I was going to build a 40’ shipping container cabin, but now I’m thinking of building it with steel SIP panels, and having them shipped in 20’ container that I can just leave on site for an extra weatherproof storage shed.

I have zero construction experience though. I want to diy and as cheap as possible while still being close enough to code (just in case the government comes knocking for not having a building or habitability permit).

Does anyone have experience with these panels? They look super easy. I have a few things that I’m unsure of though.

Slab on grade or some continuous foundation is the new earthquake code. With slab on grade, do I use SIP floor panels or just go with moisture barrier and plywood subfloor? With ‘connected post/pier’, would there be any real advantages over slab? The thought of continuously connecting the concrete piers at/below grade seems more complicated and not worth the hassle over just pouring a slab

For interior finishing, how do I put receptacles for electric outlets? The metal for hanging drywall only sticks out like 1” max and theres not enough room for outlets. On wood SIPs they just cut a hole a few inches into the panel, is it the same with steel SIPs?

Can I easily add a full window wall on most or all of one side, or does that require some sort of extra structure that I’d have to build?

>> No.2602999

>>2602977
>I have zero construction experience
>as cheap as possible
>Working with steel
NGMI

>> No.2603004

>>2602999
They’re preformed panels that snap together, not welding. And it’s like $40 per sq foot of foundation, walls, roof, and insulation, exterior siding is optional and then whatever you want on the inside

>> No.2604950
File: 764 KB, 561x901, DIYCaptcha.png [View same] [iqdb] [saucenao] [google]
2604950

>>2602977

>> No.2605602

>>2602977
sips seems like the cheapest way to diy if you don't have a lot of experience.

https://www.youtube.com/watch?v=YG5POO4EwMQ

>> No.2605733

>>2602977
upon further research, just buy a kit

>> No.2605734

>>2605733
oops

https://www.mightysmallhomes.com/advantages/structural-insulated-panels/