[ 3 / biz / cgl / ck / diy / fa / ic / jp / lit / sci / vr / vt ] [ index / top / reports ] [ become a patron ] [ status ]
2023-11: Warosu is now out of extended maintenance.

/diy/ - Do It Yourself

View post   
File: 1.17 MB, 800x800, 1559381939896.png [View same] [iqdb] [saucenao] [google]
1734880 No.1734880 [Reply] [Original]

>> No.1734887
File: 313 KB, 361x458, cool-cat-walking-i-do-what-i-want-meme.png [View same] [iqdb] [saucenao] [google]
1734887

>>1734880
You can't tell me what to do...

>> No.1734920

>>1734880
no one cares you worthless brain damaged retard

>> No.1734922

>>1734920
I care.

>> No.1734948

>>1734880
It's fine to reuse them if you're just doing some shit that's not important

>> No.1734950

>>1734880
You're not supposed to reuse condoms either, but sometimes cost effectiveness outweighs safety concerns.

>> No.1734954

>>1734920
that guy who crashed in to the crowd at a reno air race a few years ago should have cared. His plane crashed when the elevator came apart because he was reusing them,

>> No.1734980
File: 279 KB, 480x480, C46C0F4E-B911-4A92-A1C3-A3D768C8C6FA.gif [View same] [iqdb] [saucenao] [google]
1734980

>>1734954
>an elevator on a plane

>> No.1734981

>>1734980
You don't have an elevator on your plane, poorfag?

>> No.1734982

>>1734950
At the point just raw dog her, fuck condoms anyways.

>> No.1734983
File: 73 KB, 888x544, Surfaces..png [View same] [iqdb] [saucenao] [google]
1734983

>>1734980

>> No.1734988

>>1734983
Why are the elevators all the way at the back?
Wouldn't it make more sense to put them near the doors so people can get to their floor quickly and walk from there? That would also requce traffic on the ground floor corridor.

>> No.1734989

>>1734988
It's like that so people would walk more, fatass

>> No.1734990

>>1734988
it's very difficult to tell when you are pretending to be retarded, or are actually retarded.

>> No.1734991

>>1734990
I have bad news for you.

>> No.1734997

>>1734983
fake news

>> No.1735000

>>1734982
>her

>> No.1735015

>>1734880
still better than a normal one

>> No.1735019

>>1734880
FUCK YOU I WON'T DO WHAT YOU TELL ME

MOTHERFUCKER

>> No.1735024

>>1734880
I usually put a metal pipe with an outer diameter equal to the inner diameter of the threads through those and heat them up in a deep frier.
The plastic part goes back into its original shape and the parts can be used again after cleaning.
Also adds that great diy taste to your fries.

>> No.1735129

>>1735024
Genius.

>> No.1735131

>>1734880
what if i also use a split washer and a compression washer then can i reuse it

>> No.1735133

>>1734988
Usely the elevator shaft is also the main support for the building, thats why its placed in the center of the building

>> No.1735134

>>1735129
Thanks. This idea only took a third of a bottle of gin to come up with.

>> No.1735155

>>1734880
you're not supposed to reuse condoms either but i'm not made of money op.

>> No.1735213

>>1734990
Dude if you can't tell he's pretending you're the retard.

>> No.1735219

>>1735213
same goes for you.

>> No.1735225

>>1735155

>not supposed to reuse condoms

I usually turn them inside out and wear them again when my gf and I have a second go.

>> No.1735282

Take a center punch ,indent three sides make good as new or use pipe thread tape ,or locktite.

>> No.1735315

>>1735225

>I usually turn them inside out and wear them again when my gf and I have a second go.

Doesn't that get shit on your dick though?

>> No.1735322

>>1735213
Honestly have seen stupider posters on here so I don't blame him for being skeptical.

>>1734990
The general rule of thumb is that pretending to be retarded puts someone in the same basic state as being retarded. Don't overthink it, just either tell retards to fuck off or laugh at them and/or encourage them to continue their stupidity if it's actually funny

>> No.1735335

>>1734880
Thanks. I usually do but I never do anything important anyways.

>> No.1735394

If intended/required running torque is observed above the bare minimum; Why not?

>> No.1735403

>>1734990
>>1735322
Conclusion for those not sure if my post was a medium joke: Yes, it obviously was. Just have a little laugh, guys. Even if somebody is actually being stupid, what's the damage?
>>1734989
>>1735133
Thanks for playing along, guys.

>> No.1735418

>>1734880
Next you're gonna tell me i gotta torque-to-angle every fastener, and on the nut side too, aren't you, you engineer bootlicking pussy?

>> No.1735458
File: 40 KB, 349x642, pretend.jpg [View same] [iqdb] [saucenao] [google]
1735458

>>1735403

>> No.1735484

>>1735458
There is a difference between a bad trolling attempt and a medium joke. You need to recalibrate your irony detector.

>> No.1735677

>>1734880
you can if you put them on backwards (with the nylon part towards the head of the bolt) because then the self-tapped threads in the nylon go the opposite way and youre biting into virgin plastic. That's what I do and never had a problem.

>> No.1735691

>>1734990
Who's the bigger retard? The retard or the retard that follows him?

>> No.1735837

>>1734880
They're fine for furniture and other no-vibe applications, but I always buy all-steel lock nuts because there's no reason not to. Buy in bulk via Ebay instead of enduring hardware store assraep.

>> No.1735981
File: 32 KB, 650x650, RB-TISPN10-RR-x-2-For-SITE.jpg [View same] [iqdb] [saucenao] [google]
1735981

>>1734880
Its illegal to use nylocks on a helicopter.
Pic related. Superior and reusable.

>> No.1736006

>>1734988
the elevator detatches from the rear and floats to the door so you can step on it directly.

it's just in the back for storage so that the plane doesn't get front heavy and tip over in the air.

>> No.1736036

>>1735133
Heh heh, shaft

>> No.1736456

>>1735677
>because then the self-tapped threads in the nylon go the opposite way
No they don't. Think about it.

>> No.1736457

>>1736456
Not too sure he was being serious.

>> No.1736470

>>1736457
Don't correct Uncle Dad when he's teaching us! His lessons are invaluable, and there's no room for "jokes" around here!

>> No.1736483

nah mate just bolt your screw in there and spudge some epoxy on the end, same thing basically

>> No.1736487
File: 188 KB, 500x626, 8438-man-who-thought-hed-lost-all-hope-loses-last-additional-bit-of-hope-he-didnt-even-know-he-still-had.jpg [View same] [iqdb] [saucenao] [google]
1736487

>>1736456
I was going to call him out on that too, but then I just shook my head an walked away...

>> No.1736519

>>1736456
>>1736487
When I tell people I use left-handed scissors they always start looking at the pair and turning them over, going "whaaaaat".

>> No.1736528
File: 19 KB, 500x316, snibbidi.jpg [View same] [iqdb] [saucenao] [google]
1736528

>>1736519
That has some legitimacy though. Cutting with the left hand means that you would more easily see the cut from the right side, meaning that reversing the position of the blades would be preferable.

>> No.1736530

>>1736528
Nah there's some other magic going on, I can't cut certain things properly with regular scissors using my left hand.

Cloth is hard for example, it just folds over.

>> No.1736531

>>1736519

You do know there are legit left handed scissors right?

>> No.1736532

>>1736531
Yes that's what I'm using.

>> No.1736556

>>1736528
The snips that you posted are ambidextrous, as far as hand usage goes, and have pretty much nothing to do with scissors being left or right handed. If you're trolling, 8/10: good one! If you're not, 1/10 and you're a tard.

>> No.1736575

>>1736528
>right cut
>left cut
HAHAHAHA
Nigga just flip them
Use your brain
HAHAHA

>> No.1736597

>>1734880
can't i just add more threadlocker compound?

>> No.1737539

Context matters, dumb cunt. Fixing parts on an airplane is not equal to fixing parts to a desk.

>> No.1737673
File: 3.01 MB, 350x193, 1576732349575.gif [View same] [iqdb] [saucenao] [google]
1737673

>>1734950
>>1735024
>>1735134
>fun allowed