[ 3 / biz / cgl / ck / diy / fa / ic / jp / lit / sci / vr / vt ] [ index / top / reports ] [ become a patron ] [ status ]
2023-11: Warosu is now out of extended maintenance.

/diy/ - Do It Yourself

View post   
File: 52 KB, 750x738, 14587963254128.jpg [View same] [iqdb] [saucenao] [google]
1427028 No.1427028 [Reply] [Original]

gore thread

>> No.1427030

>>1427028
>external tap

>> No.1427036

>>1427028
Go look in a mirror.

>> No.1427043

>>1427028

this is fake. that is impossible.

>> No.1427046

>>1427043
>this is fake. that is impossible.
EXTERNAL TAP

>> No.1427048

>>1427028
>external tap

>> No.1427051

stop posting this lame meme. this isnt gore it isnt YLYL its fucking fake cancer

>> No.1427057

>>1427051
>>external tap

>> No.1427112
File: 232 KB, 640x1136, 3B65209A-1757-4853-9D38-E2615D9733C6.jpg [View same] [iqdb] [saucenao] [google]
1427112

>>1427051
I bet I could manage to do it if I start messing with outlets in my house. It wouldn’t be on purpose, but I would get there.

>> No.1427119

>>1427112
I'm glad the popo took my rasp...wouldn't want to rub people the wrong way...

>> No.1427123

>>1427028
real gore is finger placement past guard.
>>1427119
jesus fuck if thats your rasp

>> No.1427188
File: 19 KB, 480x361, 1509657187609.jpg [View same] [iqdb] [saucenao] [google]
1427188

>> No.1427189
File: 38 KB, 570x427, 1509724126541.jpg [View same] [iqdb] [saucenao] [google]
1427189

>> No.1427191
File: 1.58 MB, 365x205, 1506039746785.webm [View same] [iqdb] [saucenao] [google]
1427191

>> No.1427199

>>1427191
You wasted my time

>> No.1427203

>>1427191
I held my breath for 48 fucking seconds for nothing!
kys

>> No.1427204

>>1427028
https://www.youtube.com/watch?v=ylG1wgEcVBU

>> No.1427223

>>1427119
I hope you're not being sarcastic, my unit has over 200 victims filed.

>> No.1427231

>>1427188
Red goes... No it doesn't

>> No.1427443

>>1427191
My disappointment is just a a tad smaller than the ball size of the driver

>> No.1427509 [DELETED] 
File: 509 KB, 591x769, 0616EC01-1B95-4AE5-BD5C-CE462CFA13CB.jpg [View same] [iqdb] [saucenao] [google]
1427509

>tfw unsprung weight reduction is best weight reduction

>>1427231
>>1427188
I mean the calipers will still be red after he drives a couple miles assuming the paint can withstand the heat. And it better be high-temp paint because those fuckers will likely get hot when the paint gums up the slide pins and everything.

There’s a million pics of people doing that.

>> No.1427519

>>1427509
he painted the rotor retard

>> No.1427698

>>1427191

>Truck can buy 16 houses in your neighborhood
>Let me attempt something that has more than half a chance of rendering it not much better than scrap

>> No.1427715

>>1427519
No way!

>> No.1427724

>>1427698
>Truck can buy 16 houses in your neighborhood

that truck cost several million dollars?

>> No.1428082

>>1427724
no, but houses tend to be quite cheap in third world shitholes

>> No.1429176

>>1427724
Perhaps you shouldn't try to diy anything....

>> No.1429263

>>1429176
Wise advice

>> No.1429368

>>1427028
Fucking hell

>> No.1429372 [DELETED] 

>>1427112
Without defending our shitty police state these weaponsweeps are on niggers in London who carry these as weapons to stab other nigs with.

>> No.1429380

>>1427028
The dangers of stripping too much insulation

>> No.1429405 [DELETED] 
File: 1.45 MB, 4160x3120, IMG_20180720_080159.jpg [View same] [iqdb] [saucenao] [google]
1429405

>>1427028
HURRR! GUYS!! WHY IS MY BEER CAN ENERGIZED?!!!!

>> No.1429408

>>1427028
Who got my fucked up PEX gore? Like 4 T's and a feedback loop and ball valve after it all

>> No.1429413

>>1428082
Or oklahoma. I got 81k in 3 houses and 5 acres.

>> No.1429421

>>1429413
Mobile homes don't count.

>> No.1429432 [DELETED] 

>>1429372
Same with our gun laws. But the niggers don’t obey the laws anyway so the end result is all of the regular white people losing their freedom to defend themselves and repair their homes on the weekend.

>>1429413
>5acres
Nice

>Oklahoma
Nevermind. Maybe you can lease those 5acres to a trash company as a dump and then the land would actually be useful.

>> No.1429454

>>1429432
Rather live in a trash dump than be a tripfag lol

>> No.1429488

>>1428082

Not cheap to the locals. A house is still one of the most expensive things you can build/buy in any country. A brand new hilux in a third world shithole is only within reach of lawyers, doctors and government

>> No.1429493

>>1429454
I’d rather live on the Intercoastal in Miami than Oklahoma.

Seriously though what are the properties like? What the hell is the economy like and are you within a reasonable distance of civilization?

>> No.1429509
File: 66 KB, 800x514, 1291692340731.jpg [View same] [iqdb] [saucenao] [google]
1429509

/pol/ needs to leave

>> No.1429527

>>1429509
True horror

>> No.1429760
File: 56 KB, 540x540, 1520449737122.jpg [View same] [iqdb] [saucenao] [google]
1429760

>>1427119
Huehuehuehuehue

>> No.1429762
File: 32 KB, 720x719, 1513040642826.jpg [View same] [iqdb] [saucenao] [google]
1429762

>>1427028
Omg... How? Would someone deliberately connect the hot line to the box? Or is it too much exposed wire? Wtf?

>> No.1430061

>>1427191
You're a BASTARD, you know that?

>> No.1430152

I like to call these threads "stuff that I'm likely to come across in my house" given the previous bodge jobs I found.

>> No.1432067
File: 378 KB, 1280x1707, tumblr_obu1nndqQi1rji5kzo1_1280.jpg [View same] [iqdb] [saucenao] [google]
1432067

>>1427028
Like this?
From a hacksaw. Will post the mess that got me this cut, with greentext, if anyone asks. Assuming a little blood doesn't get me banned.

>> No.1432119
File: 2.98 MB, 1280x720, MSI Mayo.webm [View same] [iqdb] [saucenao] [google]
1432119

>>1427191
goddamn it

>>1429509
fucking lol

>> No.1432544

>>1432119
Masterful troll.

>> No.1432619

>>1432067
Post it pls

>> No.1432636
File: 276 KB, 1280x1707, tumblr_obu2qvUWgp1rji5kzo1_1280.jpg [View same] [iqdb] [saucenao] [google]
1432636

>>1432619
You got it buddy.
>Be me, a dumbass
>Find an engine block cut open behind an abandoned restaurant
>Pull out all sorts of cool gears, chains, etc
>Decide to make one into a pair of steel "brass knuckles"
>Drill out existing holes a little bit
>"Hurr sure lets see if my fingies fit."
>Just barely
>Cant get this fucking gear off my hand
>Over 45 minutes lube my hand with every and anything slippery in a 70ft radius, WD40, cutting oil, butter, actual lube
>Start freaking out like shit what do
>Go into garage to start filing it away.
>Another 45 minutes later, halfway through the gear, I look up and remember, oh yeah I own a hacksaw
>Start cutting a chunk of metal over my middle finger out, super careful toward the end, get to other side finishing up chunk
>Slice right through the last strip of metal into my middle finger
>The most important one
>nowwearefree.mp3
>Drive to swamp and throw the chopped up hear in
I'm lucky I didnt get to actually test it. Might have broken my fingers.

>> No.1432643

>>1432636
I try to warn everyone I can that "brass knuckles" are the most retarded garbage meme weapon ever invented, but people don't listen.

Really, you would be better off with just a round piece of metal or a knife.

>> No.1432645

>>1432643
Ooh I make some of those too. When I get home ill post a funky axe or two I made

>> No.1432716
File: 1.36 MB, 3264x2448, 0824171601_HDR.jpg [View same] [iqdb] [saucenao] [google]
1432716

>>1432645

>> No.1432739

>>1432643
>I try to warn everyone I can that "brass knuckles" are the most retarded garbage meme weapon ever invented
>but people don't listen.

People dont listen because you are stupid.
How exactly is hitting someone with a hard object a "meme"

>> No.1432744

>>1432739
Because most designs break your tarsap bones

Even most good designs damage your meta tassels. Just holding a brass weight might not hurt much but then it's not. Brass knucklesanymore,

>> No.1432775

>>1432739
basically putting this piece of metal in directly in between your knuckles and whatever you're hitting not only concentrates the force into the width of the piece in question, but its also like punching metal.

>> No.1432779

>>1432744
>>1432775
> its also like punching metal
>Because most designs break your tarsap bones

There is one universal design, and your fingers literally dont touch the metal when they are used.
The force is generated by the palm of your hand.
Are you open palm backhanding people with them?

Its obvious both of you idiots have never actually held a pair, let alone hit anything with them.
Being mall ninja faggot shit doesnt make them ineffective

>> No.1432782
File: 45 KB, 1280x720, brain-juicer.jpg [View same] [iqdb] [saucenao] [google]
1432782

>>1432779
Well, real ones will get you tossed by cops, so the mall ninjas call them some other bullshit and they are invariably a much worse design.

>> No.1432786

>>1432775
Like the other poster said, brass knuckles transfer the force from your arm to bypass around the small, weak bones of your hand directly onto the target. Old style bare knuckle prize fighters backhanded their punches (figting Irish) because modern punching without boxing gloves will break your hands in short order.

>> No.1432791

>>1432782
Im looking on google images, and even 95% of the decorative fake ones would work how they are supposed to.

Ive only seen maybe 2 that didnt have the palm piece and could hurt your fingers.

>> No.1432864
File: 35 KB, 700x551, 1469550551948.jpg [View same] [iqdb] [saucenao] [google]
1432864

>> No.1432893

>>1432779
This is correct. Proper brass knuckles won't mess up your hands at all. The force goes through to the piece held in your palm.

Had some in my teens until i used them on some gangbanger who tried to beat my ass. A few hits to his head and it was over. He cried.

>> No.1432894
File: 2.68 MB, 4640x2610, IMG_20180726_171206.jpg [View same] [iqdb] [saucenao] [google]
1432894

>>1427028

>> No.1432895
File: 2.39 MB, 4640x2610, IMG_20180726_171202.jpg [View same] [iqdb] [saucenao] [google]
1432895

>>1432894

>> No.1432900
File: 1.74 MB, 3264x1455, this kills the pallet.jpg [View same] [iqdb] [saucenao] [google]
1432900

>> No.1432933

>>1432893
yes, well. mine were far from proper lol.

>> No.1432940

>>1432900
what is it about pallets that drives people to try and use them for anything else than being a pallet and bonfire fuel?

>> No.1432967

>>1432067
I remember you! No more fooling around with scrap engine weaponry, alright?

>> No.1432974

>>1432940
If you spend all your money on beard oil and subscriptions to the guardian then you have no money left over for buying materials.

>> No.1432979 [DELETED] 

>>1429509
We're here to stay. All your base are belong to us.

>> No.1432994

>>1427051
stop eroticizing cancer

>> No.1433000

>>1432864
well atleast they're open about it.

>> No.1433008

>>1432636
Are you one of those functional retards? Why didn't you go back to the file when you got that close?

>> No.1433237
File: 2.35 MB, 640x360, clean_soldering_tip.webm [View same] [iqdb] [saucenao] [google]
1433237

are you still accepting entries?

>> No.1433511
File: 79 KB, 534x949, shame.jpg [View same] [iqdb] [saucenao] [google]
1433511

honest its just temporary

>> No.1433519 [DELETED] 

>>1432979
whichever altchan you go to, whatever board you browse, /pol/ has a commitment to spread their ideology to those who don't want to hear it...

>> No.1433541

>>1433237
i used to do that - when i was 12

>> No.1433545

>>1432716
2/10 would not enchant

>> No.1433816

>>1433008
No just a dumbass, as specified literally in the first line of the greentext. The idea was to nearly cut through then pry off the tab with pliers so I didnt cut or file my already raw fingers.

>> No.1433818

>>1433545
Well its certainly not masterwork, probably couldn't enchant it even if you wanted to. Not even finished in that picture, that's just the blank. No pics of it completed.

>> No.1433940

>>1432895
idgi

>> No.1433942

>>1432974
The ex-USMC dude next door who runs his own cell phone tower business next door made some outdoor couches using palettes. I'm not sure you have stereotyped these people correctly.

>> No.1433977

>>1433237
kek i did that but never did it to seriously clean the iron.

>> No.1434220

>>1433541
>>1433977
that is soldering flux for copper pipes

>> No.1434293

>>1433237
lol the tip is visibly thinner after his "cleaning"
no extraction fan either. thems gonna be some fucked up lungs.

>> No.1434329

>>1434220
how can you tell? can't read the label and it looks like regular paste flux

>> No.1435616 [DELETED] 

>>1429509
Makes me mad

>> No.1435626
File: 474 KB, 800x1000, F395038E-5AA8-410C-BD5B-A353B5E18392.jpg [View same] [iqdb] [saucenao] [google]
1435626

>> No.1435661

>>1434329
I converted for the 3mb file limit anon. if you really wanna know, it's an Alpha Assembly branch named BEST

>> No.1435987 [DELETED] 
File: 2.81 MB, 1843x1078, 20249eed4f8baf7904aca916a75c28cf64adf16b73b533a0c6ecccccd79875bf.png [View same] [iqdb] [saucenao] [google]
1435987

>>1433519

And everywhere else on the internet I get progressive bullshit shoved up my ass on a constant basis.

Deal with it faggot.

>> No.1436431

>outside pump isn't working
>want to check if sockets are live
>grab multimeter - figure I'll check an indoor socket so I know I'm doing it right
>have red lead on amps when I touch the socket, shit sparks, leads are black, socket is black
>I clearly don't know what I'm doing

>> No.1436438

>>1436431
This is why you don't but cheap multimeters. Sounds like you have some HF special that doesn't use a fuse. So, when you shorted the circuit it blew up. Get a better meter and put it on volts AC next time.

>> No.1436446

>>1435661
Big if true

>> No.1436456

>>1432119
haha wtf. Thats ridicilous

>> No.1436464

>>1427191

Kek even the camera man was clearly disappointed by that one

>> No.1436465

>>1436438
it's a Fluke - didn't blow the fuse though. Although to be honest, I don't know - maybe it did. I assumed since it was still working the fuse was intact. I'll check it.

>> No.1436628

>>1433942
>This literally one-other person isn't like the norm, therefore none of them are like that.

>> No.1436725

>>1432940
They're free. That's about it

>> No.1436754

>>1436465
All the flukes i use beep when you turn to volts with a lead in the amps socket.
The circuit from the amps socket is very low impedance so essentially a direct short. That's why it blew up because you put a short across mains.
Measuring voltage is ideally very high,infinite impedance so as to not draw current at all which is why you can measure voltage with it at all really.
Hopefully there is more than one fuse, certainly it might still measure voltage if something in the current path only blew up. Whether what took the hit was a fuse or something else is for you to find out, probably the fuse is the most expensive option if you want a genuine replacement!!

>> No.1436928

>>1435987
So you need a... safe space?

>> No.1436947

>>1436928
>wanting to join the jihad against free speech
lol, dont come crying when they throw you under the bus

>> No.1436968

>>1432716
You are much too old for this sheer amount of autism lad.
Also that's not a axe it's a pick now.
There's no way you can chop with those angles and prongs.
Also looks dangerous to use.

>> No.1436977
File: 3.95 MB, 4032x3024, WTF.jpg [View same] [iqdb] [saucenao] [google]
1436977

This is the master class the my apartment maintenance person put on display when he replaced the fan in my AC.

Just look at that, does it look right to you?

>> No.1436995

>>1436977
Kek

>> No.1437017

>>1433237
what is Ahmed the Clockmaker doing?

>> No.1437050

>>1436968
I was calling it a pick initially, but then i started testing it and it was actually fairly effective chopping. Should have angled it either a little more up or down to better define its purpose though.

>> No.1437073

>>1427509
This is not gore. Hes cutting the rim in half to slim it down (front wheels) or widen them (rear wheels).Try cutting a rim in half and you will realize its alot easier to pre drill than trying to mount in a saw.
I used to do this when making drag cars.

>> No.1437106

>>1435626
Kek

>> No.1437162

>>1437073
The original post on /o/ was about a weight reduction.

Do people seriously do that? Why the fuck wouldn’t you just buy thinner wheels? It seems like it would be borderline impossible to ever get the thing completely straight and balanced.

>> No.1437183

>>1429405
>not using an energy drink
I'm not angry, just dissappoited.

>> No.1437294

>>1433511
>its just a temporary fix
>5 years later

>> No.1437365

>>1436446
you really want it? it's a HUE video

>> No.1437372
File: 2.00 MB, 4160x3120, IMG_20180802_152201.jpg [View same] [iqdb] [saucenao] [google]
1437372

>>1427028
Does this count?

>> No.1437392

>>1437162
Why don't you fuck off back there tripfag

>> No.1437402

That looks very brazilian, OP

>> No.1437404

>>1437392
Got boring seeing the same old tired threads posted by kids who aren’t old enough to drive a car,

>> No.1437432

>>1427189
I dont see the problem you cant see the side hes on proably has another chair proping it up as wrll.

>> No.1437442

>>1429762
Could be an ungrounded metal box that is energized cause too much exposed wiring. That'd energize the yoke which are connected to the faceplate screws.

>> No.1437480

>>1437162
Its pretty easy to shave the edges down and weld back together.
If you want a slim wheel is hard to find decent quality that isnt wire spoke or solid. Thinner wheels in the front help with weight balance.

For fat wheels its cheaper to widen your own rims instead of having to order a custom set and most customs are made with chinesium. The last thing I want is a drive wheel rim under a >1000hp car turning into shrapnel.

>> No.1437606
File: 718 KB, 4160x3120, IMG_20180720_080147.jpg [View same] [iqdb] [saucenao] [google]
1437606

>>1429762
>>1437442
>urrrr, durrr wires off screen

>> No.1437617

>>1437372
So I'm not a 40 year master gutter installer, but what exactly is wrong about this?

>> No.1437622
File: 475 KB, 1646x435, Capture.png [View same] [iqdb] [saucenao] [google]
1437622

>>1437617
The bottom conduit is fubar-ed intentionally.

>> No.1437627
File: 447 KB, 1209x427, Capture5.png [View same] [iqdb] [saucenao] [google]
1437627

>>1437622

>> No.1437628

>>1437622
>>1437627
Stop making fun of my work. The customer said just get it done. He's lucky I only charged him $5k!

t.Jeff

>> No.1437664

>>1437480
When you inevitably die, you're a rolling IED. Just something to think about before bed

>> No.1437762

>>1432119
Lol, i have that exact motherboard, not in use.

>> No.1437770

>>1427191
>niggersstealingatruck.webm

don't they know the wood will support more weight if you stand it up vertical instead of laying flat?

>> No.1437882

>>1436977
You don't like the exposed grounding?

>> No.1437946

>>1432940
They look like legos.

>> No.1437948

>>1429509
I'd be pleasantly surprised to find a decent quality cap in there. I wouldn't have trusted the outside shell as a paperweight.

>> No.1437951
File: 207 KB, 426x316, You missed.png [View same] [iqdb] [saucenao] [google]
1437951

>>1437372
Who did this

>> No.1437952

>>1432739
I was going to say that they're a felony to even carry in my state at least. Whereas a lock and bandana are honestly a more effective weapon and while questionable to carry, are not specified in the penal code as an illegal weapon.

>> No.1437954

>>1435987
political bullshit in general have no place here newfag, keep fighting the "good" fight if it makes you feel better though.

>> No.1437956

>>1437951
Maybe someone who wanted to keep it out of the dirt, protected from landscapers, or any number of reasons. There's not enough to go on to call this gore, including what is actually being plumbed here.

>> No.1437961

Someone as stupid as you won't need to measure current anyway, just never connect a lead in there again and don't worry about it.

>> No.1437962

>>1436438
The hf special doesn't need a fuse, the trace on the board is so cheap the circuit opens faster than a slow blow fuse would anyway.

>> No.1437964

>>1434220
Aren't you supposed to braze copper pipes?

>> No.1437966

>>1437606
Yeah, this. The can is a single node, you can't have a potential g.t. zero.

>> No.1437990

>>1427043
Plastic box one switch frame connected to neutral or ground other switch frame to hot wire. I've fixed this problem.

>> No.1438251 [DELETED] 
File: 478 KB, 705x397, 1530243258027.png [View same] [iqdb] [saucenao] [google]
1438251

>>1429509
Go to /qa/ and cry to hirohito about it. If you shit yourself he might notice and do something senpai.

>> No.1438257

>>1437882
Is that not going to be a problem when it rains?

>> No.1438260

>>1432940
>using pesticide-impregnated wood as bonfire fuel
Is there ANYTHING a pallet is good for, besides being a pallet?

>> No.1438303

>>1427112
I hope they didn’t do anything untoward to the Peugeot pliers. Those pliers are actually nice.

>> No.1438308

>>1427119
That’s a file, not a rasp.
Rasps have individual pointed teeth like the teeth of a shark.
Files typically have rows of long teeth cut at a diagonal across the file surface, and in parallel rows.

>> No.1438358

>>1436754
Yeah fuse fried. Mouser sells authentic ones pretty cheap. $9 plus $8 shipping

>> No.1438959

>>1438257
>Is that not going to be a problem when it rains?
Purpose of ground wire is that you would touch IT first instead of live wire.
If your electrical device has metal enclosure, the enclosure has to be connected to ground.
Unless you were referring to something else and not the grounding wire.

>> No.1441462
File: 467 KB, 200x171, 1523796814615.gif [View same] [iqdb] [saucenao] [google]
1441462

>>1438260
People are always like
>You can't burn treated wood!
But it fukkin' burns

>> No.1441606
File: 635 KB, 480x270, skyrocket.webm [View same] [iqdb] [saucenao] [google]
1441606

>>1427203
Here, this one's quicker

>> No.1441709

>>1441462
>The Journal of the American Medical Association reported on a family that burned CCA in a wood stove for winter heating. Their hair fell out, all family members suffered severe, recurring nosebleeds, extreme fatigue and debilitating headaches. The parents complained about 'blacking out' for periods of several hours, followed by long periods of extreme disorientation. Both children suffered frequent seizures described as 'grand mal'. The symptoms were finally traced to breathing minute amounts of arsenic laden dust leaking from the furnace as fly ash. The family's houseplants and fish died, too, victims of copper poisoning from the same dust. Peters HA, et al: Seasonal exposure to arsenic from burning CCA wood. JAMA 251:(18)2393-96, 1984)

have fun with that

>> No.1441721

>>1437956
>Pipe not in the bracket above it

>> No.1441855

>>1432974
I work at a lab and have access to an endless supply of free pallets. Why not take advantage of free wood? They don't work for everything obviously, but there is plenty of great wood to reclaim there.

And I don't spend very much on beard oil at all.

>> No.1441856

>>1441721
That's not gore, that's simple pushed down below bracket. It happens, just something that needs to be fixed. There's even a paint mark where the bracket used to hold the conduit.

>> No.1441939

>>1436977
it's grounded anon, don't worry

>> No.1442494

>>1441709
You do understand that there is a huge difference between an outdoor bonfire and an indoor wood-burning stove, right? Further, you understand there's a difference between attending an outdoor bonfire every once in a while, and burning chemically-treated wood inside your house daily? I know you understand these simple differences, yeah?

>> No.1442503

>>1436977
Just because ti doesn't "look right to (you)" doesn't mean it's going to explode. What makes you nervous, seeing the wires?

>> No.1442507

>>1432636
next time retard find some fine string or twine and wrap it around your finger to compress the flesh so that you can slip your finger back out.

protip theres a way to wrap it and slide one end through the hole that when you pull the string it'll make your finger magically pop out.

>> No.1442517

>>1432893
I knew a guy who got his brass knuckles confiscated at a bar, the cop later allegedly kept them and beat up a drunk with them

Just rural merica things

>> No.1442541

>>1432895
>>1433940
Not sure either. Is he trying to point out the backwards clamp? Not exactly gore material.

>> No.1442566
File: 1.94 MB, 3928x2208, P_20180110_114932_vHDR_Auto.jpg [View same] [iqdb] [saucenao] [google]
1442566

>> No.1442599

>>1432940
>using pallets as bonfire flel in all but the most extreme of circumstances.

Do you want cancer anon?

>> No.1442606

>>1433511
what the fuck is this? A mount? How is that any easier? Now you have excess holes in your wall. Jfc

>> No.1442628 [DELETED] 
File: 3.94 MB, 4032x3024, 20180709_113321.jpg [View same] [iqdb] [saucenao] [google]
1442628

Brreak down:
>The trays are too long for this case.
>This case weighs 45 lbs
>It doesn't even have very many fibers in it
>The trays are all tied back and forth into each other without enough slack to remove a tray to work on it easily.

>> No.1442660

>>1432716
actually disturbing make more Hephaestus

>> No.1442915

>>1432544
That's from the official MSI how to channel, the video was removed few years back though, but it's very much real and not a troll attempt.

>> No.1442964 [DELETED] 

>>1429509
>>>/jp/
At least there are rules against /pol/ invasion

>> No.1442988

>>1442606
The plastic housing of the timer is what a fixed it to the wall on a backing plate. It's beside a window and the plastic had perished and crumbled to nothingness. There was no way to drill holes in it (safely and have it still function) so it stayed like that for 3 or 4 days till the new part arrived.

>> No.1443000
File: 1.36 MB, 362x386, ebin laugh spin.gif [View same] [iqdb] [saucenao] [google]
1443000

>>1427119

>> No.1443155

>>1442566
And that's why I don't make boxes without vertical finger tray even if not necessary at the time. I blame the engineer.

>> No.1443197
File: 1.78 MB, 3024x4032, 20171209_123344.jpg [View same] [iqdb] [saucenao] [google]
1443197

Guy thought TB-(number)b only referred to the bottom side of the bottom terminals. There were like 4 wires under a single terminal. Mind you this is a new install

>> No.1443216

>>1427509
>weight reduction
They are called "speed holes" you retard.

>> No.1443236

>>1442507
>next time

>> No.1443262
File: 1.84 MB, 3928x2208, P_20180112_144219_vHDR_Auto.jpg [View same] [iqdb] [saucenao] [google]
1443262

>>1443155
nah, blame the clueless mexicans in charge of maintaining this particular piece of equipment.
I did what I could, but the caps were long gone.

>> No.1443267
File: 1.05 MB, 3928x2208, P_20180105_075304_vHDR_Auto.jpg [View same] [iqdb] [saucenao] [google]
1443267

not really gore until I mention this is in a 'clean room' where your over the counter medicine is produced.

>> No.1443279
File: 2.32 MB, 444x250, HeavyGargantuanIcelandgull-size_restricted.gif [View same] [iqdb] [saucenao] [google]
1443279

>> No.1443302

>>1442494
There is a huge difference between drinking antifreeze every day, and just once in a while too.

>> No.1443745

>>1437162
retard

>> No.1443964

>>1432067
Anyone else secretly like the warm feeling when you accidentally cut yourself with a hot hacksaw?

>> No.1444085

>>1441709
Yeah because any civilized country puts arsenic in anything nowadays
Also Euro pallets aren't even chemically treated, idk why anyone would bother with that

>> No.1444100

>>1429509
At least it's a rubycon

>> No.1444170

>>1429405
Oh my god. Guys, I just had an idea how to generate free energy! Patent pending, do not steal

>> No.1444306
File: 266 KB, 720x1280, Screenshot_20180812-053534_Chrome.jpg [View same] [iqdb] [saucenao] [google]
1444306

>>1429454
No shit.

>> No.1444307

>>1444306

is he still embarrassing himself.

I tried to help him. did not work.

>> No.1444308

>>1429493
Depends what you call civilization. We got a couple gast stations. Dollar general, pizza hut. Half an hour from a walmart probably.

Kinda backwoods. Economy doesn't really affect anything here unless cattle or oil is down. Then its fucking depressing

>> No.1444313

>>1430152
Same. Fucking hate this place

>> No.1444315

>>1444307
He's probably our fucking moderator. I bet he thinks he's curating excellent conversations or something instead of just being a faggot.

>> No.1444316

>>1432636
Thats why you never use a metal cock ring

>> No.1444329

>>1427698
>>1427698
I'm guessing they wanted it to bend so the truck would go in at a more horizontal angle and clear the opening

>> No.1444332
File: 153 KB, 797x579, 1529921199879-diy.jpg [View same] [iqdb] [saucenao] [google]
1444332

>> No.1444340

>>1442599
Kek. Me and some drunk buddies drug an old telephone pole out of the woods and tossed it on a bonfire. What is arsnic

>> No.1444343

>>1444315
>a mod
Jesus if I had that kind of free time, I would be collecting karma on Reddit

>> No.1444349

>>1443267
You know it's clean because you can see it's caught the dust

>> No.1444518
File: 415 KB, 480x238, you_that_you_so_desperately_crave.gif [View same] [iqdb] [saucenao] [google]
1444518

>>1443302
>being this retarded

>> No.1444766
File: 2.15 MB, 3120x4160, IMG_20180813_171502.jpg [View same] [iqdb] [saucenao] [google]
1444766

>>1427028
More for a laugh than gore

>> No.1444828 [DELETED] 

>>1429509
>Muh /pol/

You retards are fucking everywhere.

>> No.1445121

>>1444332
Classic

>> No.1445135
File: 10 KB, 198x254, images (7).jpg [View same] [iqdb] [saucenao] [google]
1445135

>>1444766

>> No.1445193

>>1444349
>>1443267
yeah this don't bother me much unless the fan starts blowing the other way. also, this is nothing compared to most fans I open up. try a 1/4 in. of human grease and pethair and worse, it's all black and smells like your diabetic meemaw

>> No.1446188

>>1444332
is soviet LED

>> No.1446222
File: 252 KB, 1280x800, where are the plans robut.jpg [View same] [iqdb] [saucenao] [google]
1446222

>>1444332

>> No.1446233
File: 2 KB, 236x176, 3dd.png [View same] [iqdb] [saucenao] [google]
1446233

>>1443267
This isn't really go-
>'clean room' where your over the counter medicine is produced.
Oh jesus. Aren't those rooms meant to be well ventilated to prevent this mess?

>> No.1446236

>>1437372
Looks like my Dad's plumbing job.

>> No.1446269

>>1443267
bet you could smoke that shit

>> No.1446386

>>1446233
All I have to say is there's a reason generics are cheaper.
You won't find this shit in a name brand facility.

>> No.1446393

>>1427223
Lole, nice one

>> No.1446404

>>1446233
It isn't that unusual for a "clean room" to be rather dirty. The cleanliness refers to the shit floating in the air, while dust sitting on shelves and whatever is less of a concern as long as it stays there.

>> No.1446523
File: 3.16 MB, 4160x3120, m1.jpg [View same] [iqdb] [saucenao] [google]
1446523

>>1427028
Posting my clock, does it count?

>> No.1446881

>>1444766
not sure why the gum is there, but that weld looks fine. Depending on where you live, residential/industrial railings only need to hold 300lb typically in any direction

>> No.1446911

>>1432864
Custom craftsmanship

>> No.1446913

>>1432967
>this is why I lurk
>/diy/ what a dysfunctional place

>> No.1446925

>>1446523
How many scholarships did you get?

>> No.1446955
File: 145 KB, 915x725, 1324029183152.jpg [View same] [iqdb] [saucenao] [google]
1446955

>> No.1446956
File: 72 KB, 640x480, 1328624398473.jpg [View same] [iqdb] [saucenao] [google]
1446956

>> No.1446960

>>1442566
At least they're labeled.

>> No.1446961

>>1443279
How the fuck?

>> No.1447031

>>1446955
Been there, done that. I even had a light switch to turn it on and off. Properly recycled into other projects after I used it the one time to test a project

>> No.1447065

>>1446523
Why didn't Obama invite you to the white house?

>> No.1447074

>>1443262
>>1443197
>>1442566
Can you explain what I am looking at?
I just see scorching and wires.

>> No.1447415 [DELETED] 

Some good old fashioned video gore, too lazy to make it a webm
https://youtu.be/DJOX0c60wQE? t=8m30s

>> No.1447420

Some good old fashioned video gore, too lazy to make it a webm
https://youtu.be/DJOX0c60wQE?t=8m30s

>> No.1447441

>>1446956
you should have used a shift register for the display so you could use a smaller uC.

>> No.1447472

>>1446523
i like it 8/10

>> No.1447475

>>1447472
More like 9/11

>> No.1447486
File: 1.82 MB, 3264x2448, IMG_20140903_171658.jpg [View same] [iqdb] [saucenao] [google]
1447486

>> No.1447490

>>1427191
Heh

>> No.1447498

>>1429509
I know rubycon is good but I don't wtf MASTER is

>> No.1447507

>>1444332
could use some electrical tape

>> No.1447531
File: 3.89 MB, 2400x3200, IMG_20180818_003556.jpg [View same] [iqdb] [saucenao] [google]
1447531

>>1442566
You've see nothing yet buddy.
This panel has been in continuous use since 1995 and is vital to the 24/7 operation of the plant, and they have no plans on cleaning it up. There are others like it too. Years of people troubleshooting and not putting the wires back takes its toll.

>> No.1447608

>>1447531
its not like its vital to its function

>> No.1447609

>>1446961
Drilled through wire mounting blinds

>> No.1447621

>>1446956
I don't get it?

>> No.1447625

>>1447531
years ago I worked on a jail/federal court house electrical service change, shut down for 36 hours hook up to a generator temporarily for vital things like heat (10f outside that night) new gear ect.... apparently there was also a server in the building that handled 911 calls for the area and rerouted them to a call center hiding in the wardens closet for the last 10 years, covered in dust and all sorts of crap. After we shut down power for a few minutes someone got a call and thats how everyone, including the warden, found out 911 was down for the area. It had been down for 30 minutes at that point and I think it got found and hooked back up to power another 30 minutes after that.

can you imagine you just got in a car accident somewhere without a lot of people around, your friend dying and you get a not in service response when you call 911?

>> No.1447741

>>1447625
So I gotta ask, was the thing plugged into any sort of UPS that failed near immediately or did it not even have that?

>> No.1447774

>>1447625
911 service fails over to the local police department dispatch line
. That said, they arent equipped to deal with the callvolume

>> No.1447807

>>1432716
Is this a Mirror's Edge reference

>> No.1447808

>>1432864
It says "Eurica" in Russian

>> No.1448067

>>1427112
What the fugg.

Why do these people allow someone into their house to steal tools? Why don't they shoot them?

>> No.1448211

>>1446956
>>1447621
>I don't get it?

i'm pretty sure it's the sodder job that triggered him

>> No.1448214
File: 392 KB, 540x540, the line method.webm [View same] [iqdb] [saucenao] [google]
1448214

>>1432119

>> No.1448260

>>1432940
noobs think wood = wood. what they dont know is that pallet grade is just slightly higher up from bonfire grade. its lower than fence grade and way below structural or dressed grade.

>> No.1448261
File: 1.06 MB, 919x720, 1524238359344.png [View same] [iqdb] [saucenao] [google]
1448261

>>1432940
Its free wood.
If you're not as dumb as the average American, you know how to tell if its been treated with pesticides. If it has, much like your food, then you shouldn't really be burning it, especially if marked with an MB.

Pallets are used to ship many things (food for example) which requires the wood to only be heat treated and are a valid source of upcycling wood. They are also a great way for beginners to learn without being jewed for trash wood from stores.

>> No.1448265
File: 10 KB, 259x194, alex.jpg [View same] [iqdb] [saucenao] [google]
1448265

Anyone got that cardboard car meme?

the one with the guy driving it around, can't find it anymore. was a good meme

>> No.1448347
File: 179 KB, 700x650, diy-pallet-sofa-14[1].jpg [View same] [iqdb] [saucenao] [google]
1448347

There is literally nothing wrong with this. Just stain and seal it and you're fine, even if it is pesticide laden (you can get pallets that aren't though).

>> No.1448430
File: 54 KB, 480x640, metric glownut.jpg [View same] [iqdb] [saucenao] [google]
1448430

>>1444332
Now you have seen the Russian LED.
I give you the metric Glownut

>> No.1448432
File: 41 KB, 720x538, tire pimple.jpg [View same] [iqdb] [saucenao] [google]
1448432

>> No.1448435
File: 56 KB, 757x527, burp.jpg [View same] [iqdb] [saucenao] [google]
1448435

>>1448432

>> No.1448444

>>1448435
how much pressure is in those giant ass tires?

>> No.1448446

>>1448444
45-50 psi.

>> No.1448681

>>1427191

bloody bitch bastard bitch you bloody bloody you bloody bitch running like lady bitch bastard you bloody bloody bastard bitch

>> No.1449103

>>1448681
Easy there Padoo.

>> No.1449110

>>1448347
I hope these people throw a party and some of the guests cut their asses on a rusty nail sticking out of that shit and at least two of them come down with lockjaw.

>> No.1449743

>>1448444
not much, when I run scrapers theyre generally around 20psi and those tires are like 8ft around. almost all heavy equipment with rubber is underinflated for traction. fun fact an oldschool trick we use with equipment is to level the machine out by deflating certain tires. I remember a mechanic confused when he checked a skip loader with like 7psi on one side and 40 in the other, and subsequently the operator freaking out when he saw the guy messing with the pressure.

>> No.1450918

>>1442660
This, while most likely ingenuine, is the nicest compliment I have ever gotten. Thank you anon.

>> No.1450923
File: 2.17 MB, 1942x1112, stickers_he_thinks_the_stickers_are_the_best_part.jpg [View same] [iqdb] [saucenao] [google]
1450923

>>1450918
>Thank you anon.

de nada

freaks cannot resist

>> No.1451005

>>1442566
Shit that is nothing. At least most of them are labeled.

>> No.1451013

>>1447625
I worked in a jail and we had to find the HVAC computer. Turns out when we followed cabled they dead ended. Some dickwad drywalled over the door at some point years ago making an empty room with no way in or out. We busted the wall down and there it was the HVAC computer, some old 386 running win 3.1. It had be running non stop for almost 12 years at that point.

>> No.1451023

>>1427188
The paint will wear away where it isn't wanted.

>> No.1451067

>>1450923
What type of powertrain does it use. I need to know for scientific reasons.

>> No.1451077

>>1451013
>Some dickwad drywalled over the door
'dickwad' probably just wanted stress-free functional HVAC.
the chances of obtaining that continuously for over a decade would have been about fuck all, were control pc publicly accessible.

>> No.1451093
File: 1.97 MB, 4032x3024, C4058560-B965-457A-8B2A-D4050267C423.jpg [View same] [iqdb] [saucenao] [google]
1451093

Recent find in the wall of a house I’m renovating

>> No.1451094
File: 2.02 MB, 4032x3024, 44284B9C-A8C4-4638-9CDE-9FFBF4E81458.jpg [View same] [iqdb] [saucenao] [google]
1451094

Another goodie I have on the box I recently replaced.

>> No.1452040

>>1451067
It's very clearly old Volkswagen stuff.

>> No.1452058

>>1452040
I’m sorry I asked

>> No.1452237

>>1427051
>"Well doc, what are the results"?
>"I'm afraid it's fake cancer".

>> No.1454103
File: 1.09 MB, 3264x2448, 0905171354_HDR.jpg [View same] [iqdb] [saucenao] [google]
1454103

>>1450923
Found another one of my axes looking through old pics.

>> No.1454503
File: 380 KB, 1536x2048, crunch.jpg [View same] [iqdb] [saucenao] [google]
1454503

imagine the sound

>> No.1454628

>>1436947
you're the fucking reason why they can throw people like me under the bus, because they compare me to you and your incessant preaching.

>> No.1454726
File: 541 KB, 2448x3264, C_Fanasa Cabinet1.jpg [View same] [iqdb] [saucenao] [google]
1454726

>>1447531
Ill see your picture and raise you this.

>> No.1454727
File: 432 KB, 2448x3264, C_Fanasa Encoder Y1.jpg [View same] [iqdb] [saucenao] [google]
1454727

>>1454726
Gee I wonder why it don't work...

>> No.1454728

>>1450923
Nothing but class having a lane changer and side mirrors.

>> No.1454739

>>1454103
>axe with a tang instead of an eye

wow, this really is a gore thread

>> No.1454741
File: 3.02 MB, 4160x3120, IMG_20180829_192011530.jpg [View same] [iqdb] [saucenao] [google]
1454741

Glue guns are the epitome of professionalism

>> No.1454770

>>1454503
imagine the price

>> No.1454771

>>1435626
That 2001 squad was STACKED
>t.husker fan

>> No.1454805

>>1454739
If only I had more pics of my goblin weapons. I once tried to weld a hooked blade into a slot in a thicker blade, set myself on fire, and warped the everliving fuck out of both blades.

>> No.1454875
File: 49 KB, 307x311, -=.jpg [View same] [iqdb] [saucenao] [google]
1454875

>>1427191
I laughed hard at the end you bastard.

>> No.1454904

>>1427191

THIS IS A BLUE BOARD YOU NIHILISTIC FUCK

>> No.1455005

>>1432940
Pallets were so badass when I was a kid. Every once in a while my dad would bring a few home from work for my sister and I. To us it was so perfect as a fort and platform prefab, because it was self stable and way easier than using 2x4s for everything.

>> No.1455006

>>1455005
>my dad would bring a few home from work for my sister and I.

cool. My dad never brought anything home for I.

>> No.1455009

>>1455006
>cool. My dad never brought anything home for I.

very funny, but the other anon was correct, when it's you and someone else, you are supposed to say "my sister and I"; "my sister and me" is retard level.

american education, folks.

>> No.1455107

>>1444332
That's fucking terrifying

>> No.1455134

>>1432716
this is like something from an early 3D JRPG

>> No.1455151

>>1455009
For my sister and me
Me is part of the compound object of the prepositional phrase beginning with for.
So yes, you're wrong.

>> No.1455153

>>1432636
pro tip: if you get your finger stuck like this
don't panic
hold your hand up over your head to reduce swelling
pull the metal thing off your finger

>> No.1455273

>>1451023
It will also heat up way hotter than some components can take.

>> No.1455279

>>1455273
I'm just curious. How much hotter can a layer of paint on metal make brake calipers? Also, what part of the caliper can't take said heat?

>> No.1455767

>>1438251
it's a joke you idiot, non-black capacitor going into a black capacitor

>> No.1455768

>>1444828
please see
>>1455767
it's a joke and you're so fucking laser-focused on your stupid fight you can't see it

>> No.1456019

>>1455279
That paint will be pure carbon dust by the time you get your morning latte. The rubber boot on the piston caliper will be most heat affected but there will be zero additional heat. Actually there will be less heat until the paint is gone, the paint will lubricate the brakes, therefore less brakes no extra heat but it will burn off and be fine.

>> No.1456022

>>1456019
oops "caliper piston"

>> No.1456535

>>1447074
What your looking at is a box encasing control equipment. What that gear in the box is controlling idk without having been there. Things like lights, automatic blinds, to telling a piece of switch gear to turn off or on. He cleaned it up, but the panduit covers were gone. Things are easier to trace, troubleshoot, and repair when its all cleaned up. It also really shows the next guy if you cared or not.

>> No.1457221

>>1437951
If the pipe had been in place, whatever is supposed to run through that pipe wouldn't be going anywhere

>> No.1457714

>>1443267
Haha. Cleanroom.

I used to be the lead engineer at a medical device company. We had an ISO Class 10000 cleanroom. Yes there are far better but this was rather large and typical for these types of devices.

Some idiot changed the climate control system to 75f / 0%H. Zero. The system ran all weekend trying to achieve 0% humidity. We came in on Monday to find that moisture had been pulled in through the walls and bubbled the paint inward. They wiped down the walls with cleanroom wipes and continued working. I was shocked.

Another time, some dolt sliced his hand open while packaging product. Capillary action pulled his blood into the product, which had 0.006” channels running through it. He didn’t notice, bagged them, and put them in outgoing post-QC. We found it the next day and moved the bags to quarantine. The idiot went back and had them shipped that night. Never got a call. I have to assume they failed biocomp. Otherwise, some poor bastard got this idiot’s gamma-sterilized blood in their IV restrictors

>> No.1457732

>>1457714
...

Just. Wow.

>> No.1457740

>>1457714
Worry dot jpeg

>> No.1457741

>>1429509
>/pol/ needs to leave
we're not going to, we need to learn stuff for the upcoming meme wars.
Have a (you) though
#resistance

>> No.1457742

>>1442915
It took me a while to get it.

>> No.1457744

>>1442606
It's a no-smoking sign.

>> No.1457745

>>1441606
That is not an aerodynamic rocket.
Which is ok, because there's no air in space, which is where it's going.

>> No.1457746

>>1443279
>twitch

>> No.1457747

>>1446233
Anon, that IS the ventilation.

>> No.1457748

>>1446523
Needs more chemical energy

>>1447486
Hot

>> No.1457749

>>1451094
what the fuck

>> No.1457750

>>1454503
imagine my old gearbox...

The clutch is a construct of the cis-huite patriarchy

>> No.1457761

>>1432067
the worst cut i ever got was stabbing the part between my thumb and hand with a sharp screwdriver. i still can only feel 75% of that thumb

>> No.1457763

>>1427028
I bet someone tripped the GFCI before this photo :3

I've discovered at home that an idiot cabled a light with phase and neutral on separate circuits.

>> No.1457767

>>1437966
>implying the probes are connected to the meter

>> No.1457770

>>1448430
Do they ship a color scale to deduce the intensity?

>> No.1457772

>>1447486
We told you not to piss the pixies off :3

>> No.1457774

>>1448214
Heard it works best with arctic silver :o)