[ 3 / biz / cgl / ck / diy / fa / ic / jp / lit / sci / vr / vt ] [ index / top / reports ] [ become a patron ] [ status ]
2023-11: Warosu is now out of extended maintenance.

/diy/ - Do It Yourself

View post   
File: 3.38 MB, 4032x3024, 1487803947057-710001931.jpg [View same] [iqdb] [saucenao] [google]
1134955 No.1134955 [Reply] [Original]

How do you guys clean further and rust? I'm cleaning an old pickaxe I got from my dad a while back. It was pure brown when I got it and I'm still having troubles getting in between. Have any tips?

>> No.1134956

>>1134955
soak in citric acid solution, or cocacola

>> No.1134959

>>1134955
Brake cleaner..

>> No.1134960

>>1134956 Thanks, had a few mixed responses from friends so I'll stick with that. Thanks.

>> No.1134964

>>1134955
Just use it often

>> No.1135398

How clean you want it? Sand it, rough to high grit in sequence until you're happy with the finish.

>> No.1135563

>>1134955
Depends on how bad it is. If it's just service rust but you want to maintain the finish use 1000 grit sand paper and lightly rub. If you want to remove deeper pitting you'll need some seriously rough sand paper or get a sand blaster.

>> No.1135579

>>1134955
Could always give naval jelly a shot.

>> No.1135584

google
electrolytic
rust
removal, it is what museums
use. it works great

>> No.1135615

If you want to remove rust and leave the pitting, wire wheel on a grinder, if you want polish, flap disk on a grinder

>> No.1135618

Wire wheel is the way to go if it's heavy rust. Just wear respirator, that fucking fine rust dust is pretty annoying (albeit, afaik, not that unhealthy)

>> No.1135633

>>1135584
I've tried that, terribly slow and more power hungry than abrasive methods like sand paper and wire brushes

>> No.1135635

>>1135633
rainex, when its job is done, spray it with canola oil. Keep it oiled after each use. Won't rust again!

>> No.1135659

Sand blast it. Nice and easy if you have a friend who has one

>> No.1135679

What is it with /diy/ and prettying up tools that are supposed to be used to beat, pierce, cut and dig that basically get their surfaces fucked up during use?

>> No.1135685
File: 1.12 MB, 2048x1152, 20161027_143324.jpg [View same] [iqdb] [saucenao] [google]
1135685

>>1135679
>not being able to appreciate the aesthetics of a nicely patinad tool
wew lad

>> No.1135687

>>1134955
>Have any tips?
Oil it and leave it the fuck alone. Are you putting it in your shed or on your mantelpiece?

>>1135685
> having a bunch of tools that you treat as showpieces.
> being more worried about your tools being pretty than functional

wew lass.

>> No.1135824

>>1134955
It looks fine you fucking cock goblin

>> No.1135873
File: 169 KB, 1242x1638, IMG_1801.jpg [View same] [iqdb] [saucenao] [google]
1135873

That axehead looks fine as is, I'd put a handle on it and call it a day. But you remind me of me, always looking for a project. Pick up a gravity feed sand blast gun from Harbor freight. You can get a 50 pound bag of play sand for $4 from Home Depot. Use a window screen to sift the sand into a 5 gallon bucket, that way it will remove any of the big particles. Use that sand as your media and put it in the gun. Presto molest-o, you're sand blasting for $25. Best part is you can do it in the yard in the play sand just becomes part of the dirt so no need for cleanup.

>> No.1135887

"Cold blue" it by letting it soak in Bleach for a couple of days

>> No.1135892

Wire wheel on a bench grinder works wonderfully for a lot of things. Sand blasting is probably better, but if you don't already have an air compressor, it's a relatively large investment just to get some rust off, whereas you can get a bench grinder and a wire wheel for like $40