[ 3 / biz / cgl / ck / diy / fa / ic / jp / lit / sci / vr / vt ] [ index / top / reports ] [ become a patron ] [ status ]
2023-11: Warosu is now out of extended maintenance.

/diy/ - Do It Yourself


View post   

File: 268 KB, 1280x720, 20150913_183612.jpg [View same] [iqdb] [saucenao] [google]
874432 No.874432 [Reply] [Original]

Hey bros. How can i fix this?

>> No.874433

>>874432
Bump

>> No.874434

>>874432
get a new plug then rewire it

>> No.874441
File: 26 KB, 360x360, Two-Round-pin-Plug-with-Power-Wire.jpg [View same] [iqdb] [saucenao] [google]
874441

>>874432
You don't, get a new one. If you absolutely need it and can't replace it, open it up, cut the input wires, drill a hole in the case, pass one of these and the plug to the wires you previously cut, isolate with shrink tube.
Most cases aren't designed to be opened, so you might have to use tape to keep it closed, at that point it's "ghetto approved".

>> No.874444
File: 216 KB, 590x322, latest.jpg [View same] [iqdb] [saucenao] [google]
874444

>>874441
>pass one of these and the plug to the wires you previously cut
I meant: pass one of these and solder the wires to the ones you previously cut

Also, check my digits

>> No.874447

>>874432
replace the entire cord or burn your house down