/diy/ - Do It Yourself

>>2397360
>My mom's face thing won't charge
I should say that it charges but cannot operate for > 1 min. I suspect the battery needs replacing.

Spudger or two and gentle heat like from a tea kettle?

>>2397482
ok, I will buy a spudger then. I currently don't have one. I don't mind waiting if it's the right tool.

>>2397487
Yea spudger deal. The metallic caps might pop off first and then the whole clamshell may come apart. Make sure there’s no screw hidden under stickers or labels somewhere.

>spudger
Why do I always forget that this is a tool that exists? My first instinct was to get out the hacksaw and hotglue

>>2397360
>the output voltage is correct
this doesn't mean shit if it's a bad battery. does it stay at 7v or does it immediately drop when any load is applied and stay low? that means the battery has shit the bed

>My mom's face thing won't charge
>depleted the battery and charged to 100%
these are contradicting statements

>>2397517
>this doesn't mean shit if it's a bad battery
This 7V was output by the charging station. My guess is the battery is bad.

>these are contradicting statements
stop trying so hard I corrected it in the first post

>>2397529
oh yes because
>I should say that it charges but cannot operate for > 1 min
makes much more sense
it charges but it doesn't charge
I see

>>2397360
Your mom's vaginal juices corroded a contact.

>>2397487
it appears to be snapped or cemented together, rather than ultrasonically welded... may be wrong tho. personally I'd try an isesamo, my favorite opening tool, rather than a standard square spudger or any of those plastic picks

>>2397360
medium-heavy guitar picks
don't argue with me
just dew it

So I did get an isesamo. I didn't need it yet. I removed the top part held by two philips screws. The bottom will not release and I don't know what's holding it. It looks like there's two friction clasps on the bottom. Any ideas? Don't want to risk breaking it. My mom will kill me.

There also appears to be standoffs on the interior of the enclosure. Could I have to remove the grey part to access the screws? I hope not...

This thing is held together tighter than my asian gf's pussy

>>2398972
>tighter than my asian gf's pussy
tighter than the stitches on your body pillow

>>2399065
>incel projection in a /diy/ thread
you've reached the apex of desperation

>>2399066
>you've reached the apex of desperation
he muttered to himself as he struggled to disassemble his (mom's) muff utensil.

>>2399099
>struggled to
that's what im trying to solve

>>2399113
How long have you been at this, Anon?

>>2399119
wed. judging by my OP creation. I haven't slept or eaten. Just been doing this.

>>2399119
eew, a republican.

>>2399121
>>2399122
Good boy. Have some Ramen noodles.
>pats head

out of the handful of /diy/ threads I made over the years, all of them have been 1 or 2 anons giving useful advice, and me slowly chipping away at a problem until it's solved while fags shitpost along the way

>>2399131
You saved /diy/ all by yourself, Anon. I'm golf clapping with my buttcheeks right now. Hooray.
Hey, that cunt clipper ain't gonna take itself apart. Better get crackin.

>>2399135
I know you're just lurking this thread to buy one yourself and repurpose it as a vibrator anon. No shame. I guess it was your gay pride day yesterday too

>>2399151
>No shame.
eew, a "democrat"

My plan is to replace pic related with Sony US18650VTC4

Can someone confirm this is safe? I matched capacity and voltage. I'm not sure about max continuous current.