[ 3 / biz / cgl / ck / diy / fa / ic / jp / lit / sci / vr / vt ] [ index / top / reports ] [ become a patron ] [ status ]
2023-11: Warosu is now out of extended maintenance.

/diy/ - Do It Yourself


View post   

File: 1.13 MB, 2496x1244, compare.png [View same] [iqdb] [saucenao] [google]
1411318 No.1411318 [Reply] [Original]

which is better

>> No.1411335

>>1411318
Great stuff has better penetration

>> No.1411358

>>1411318
Neither. Gorilla glue.

>> No.1411620

>>1411318
For lubrication I prefer great stuff. For a general sealant I like wd40

>> No.1411677

>>1411318
sea foam is the end-all be-all of penetrants

>> No.1411685

>>1411318
That stupid foam shit, you can never use half a can and expect to use the rest of the can at a later date. The can is done after the day you break the seal so you better use the whole thing.

>> No.1411689

>>1411318
i spray great stuff on my asshole/balls, let it set. then rip it off. it really beats waxing

>> No.1411724
File: 80 KB, 800x800, 47563.jpg [View same] [iqdb] [saucenao] [google]
1411724

>> No.1411736

>>1411724
no other product makes it more obvious that they do not employ graphic designers

>> No.1411743

>>1411318
$1 break fluid from dollar tree for cost/effectiveness.

Seafoam for best prob.

>> No.1411770
File: 14 KB, 181x255, 066629dff4a4520e76a9948897fc0eb89db759c0a69c0af749eac3cecf5d7685.jpg [View same] [iqdb] [saucenao] [google]
1411770

>>1411736
>paying for (((marketing)))

>> No.1411775
File: 291 KB, 1500x1500, dr bronner.jpg [View same] [iqdb] [saucenao] [google]
1411775

>>1411736

>> No.1411781

>>1411775
that shit will melt your pubes off lol. a great way to wake up when camping

>> No.1411804

>>1411724
I found PB to be about equivalent to WD in terms of penetration. the only difference is that it's fizzy and smells like old man attic.

>> No.1411820

>>1411318
>not making your own penetrating oil

50/50 mix of Automatic transmission fluid and acetone, btfo store bought shit and you get a much larger quantity for the price

Thank me later

>> No.1411822
File: 2.96 MB, 4032x3024, image.jpg [View same] [iqdb] [saucenao] [google]
1411822

>>1411804
PB is like $3 for a big can at Home Depot. I’ll spray that bitch all over whatever isn’t important enough to necessitate using proper oil or penetrant. Fuck that overpriced WD-40.

>> No.1411831

>>1411775
>bought a bottle of this at target because muh tingly soap
>shower right before bed
>several times woke up in the morning with cloudy blurry vision
>one time was really bad and took a long time to clear up, felt halfway blind all morning
>googled it
>other people have complained about it irritating the fuck out of their eyes and causing blurry vision
>ended up in a rabbit hole and watched the bronners documentary

>mfw dr bronner himself went blind in his 40s, he started using his castile soap in his 20s

I noped the fuck out of there and stopped using it altogether.
Its really not very good anyways.

>> No.1411833

>>1411318


>>1411318
Definitely WD40 because, which one will be remembered

>> No.1411853

>>1411775
there's no room for graphic design because their spiritualist rant takes up most of the label

>> No.1411880

>>1411770
>obsessed with the jews

>> No.1411882

>>1411804
WD-40 is not a penetrant.

>> No.1411883

>>1411882
What exactly is your definition of a penetrant, and why doesnt WD-40 fit into it?

>> No.1411897
File: 132 KB, 920x920, kano-aero-kroil-10oz__32043.1522027458.jpg [View same] [iqdb] [saucenao] [google]
1411897

>>1411318
this

>> No.1411907

https://www.youtube.com/watch?v=st8dkGzJWtg

>> No.1411920

>>1411736
It has its charm.

>> No.1411921

>>1411620
Wd40 isnt a lubricant.

>> No.1411987

>>1411831

you go blind from trying to read all that tiny text on the label

>> No.1412494
File: 112 KB, 680x447, image.jpg [View same] [iqdb] [saucenao] [google]
1412494

>>1411897

>> No.1412519

''tst''

>> No.1413780

>>1411897
2nd this. Kroil is a godsend

>> No.1413790

>>1412494
>>1413780
Is it really that great compared to Liquid Wrench or PB Blaster?

>> No.1413804
File: 155 KB, 1280x853, tumblr_myxmlhTpWx1rz4h73o1_1280.jpg [View same] [iqdb] [saucenao] [google]
1413804

>>1413790
according to South Main Auto on youtube, it doesn't really matter

hose the bolt down with whatevers on hand (wd/kroil/pb/brakleen/oil) and break out the shake'n'break/induction heater/oxyacetylene

>> No.1413807

>>1411685
Turn it upside down, spray it until it runs clear spray, plug it.

>> No.1413825

>>1411921
>Wd40 isnt a lubricant.

Yes it is, stop being a mong

>> No.1413828

>>1411685
Maybe, like, read the instructions on the can

>> No.1413830

>>1413828
Fuck that. It’s an aerosol can, what more do I need to know?

>> No.1413839

>>1411685
sometimes you can pick the dry foam out with a nail or other pointy object. failing that just pound a nail through the valve. of course once you do that the can will run till empty so best to make sure it's a big enough job to finish off the can

>> No.1413841

>>1413839
do this and throw it in someones car

>> No.1413873

>>1413830
If you'd read the can you'd know to turn it upside down to clear the nozzle

>> No.1413909

>>1413780
>>1411897
I huff this shit because it smells so good.

>> No.1413935

>>1413841
We used to use a lot of foam at work and would get dud cans that wouldn't work when you used them. People would throw them in the trash pile but I would always take them out. Shake the piss out of them and you now have an exploding foam shooting target. Anyways peep through the door with a pellet gun and shoot it and you'll never remove the foam that shit launches 30 feet in every direction.

>> No.1413966

>>1411880
>>>/pol/ ===>>>

>> No.1413977
File: 23 KB, 198x447, 1530041963547.jpg [View same] [iqdb] [saucenao] [google]
1413977

>> No.1413978
File: 20 KB, 240x445, 1530042125716.jpg [View same] [iqdb] [saucenao] [google]
1413978

>> No.1414390

>>1411724
try candle wax applied to a heated, stuck fastener next time.

Blew my fucking mind when it got steel out of aluminum

>> No.1415414

https://youtu.be/st8dkGzJWtg

>> No.1415416

I have PB blaster and WD 40 and I don't see a difference between the two.

>> No.1415419
File: 12 KB, 330x330, ae235.jpg [View same] [iqdb] [saucenao] [google]
1415419

>2018
>Still haven't converted to silicone spray

>> No.1416211

I use PB blaster, but honestly, usually I resort to the drill. I think I usually have normal bolts, or bolts that are so rusted they have become one with the substrate.

>> No.1416255

>>1415419
Reminds me that I've seen more than a few products advertising that they DON'T use silicone oil.
Never heard the reason why avoiding it would be a good thing, though.

>> No.1416259

>>1415419
>>1416255
Silicone is a crappy lubricant (no film strength) and it will absolutely fuck any attempt to paint anything ever again in your workshop. The shit contaminates everything.

>> No.1416280

>>1411907

Has there ever been a test between penetrating oils that tested on 100+ rusty bolts? Just testing on a few bolts tells you literally nothing because the sample size is minuscule.

That is why you have several youtube tests showing conflicting results. ie. wd40 is best in one test and worst in someone else's test. The sample sizes are so small that they are 100% useless.

>> No.1416284

>>1411736
Are you sure? That garbage screams graphic design to me.
If you ever want something done wrong, let a graphic designer work on it. Never let them within 100 feet of a GUI, untold billions/trillions of dollars of productivity have been murdered by the decisions of graphic designers.

>> No.1416303
File: 1.25 MB, 2223x2223, 66fd0d31-497f-430e-b61f-032850fde1a2_1.39856d6135dc664eba31b6d9559fb1d3.jpg [View same] [iqdb] [saucenao] [google]
1416303

amateurs.

>> No.1416345

>>1416303
How’s the penetration?

>> No.1416385
File: 86 KB, 931x1024, 1502444575576.jpg [View same] [iqdb] [saucenao] [google]
1416385

>>1411831
obviously you didn't read the directions and/or need to still be bathed because you can't rinse yourself properly

>>1416284
graphic designers are fine, you just have to housebreak them

>>1416303
filthy landlubbing casual

>> No.1416483
File: 20 KB, 580x580, AC94A828-0DCB-4EAA-9751-6F8D1C8DDB87.jpg [View same] [iqdb] [saucenao] [google]
1416483

>>1416303
>>1416385
Pic related. It’s great for some shower time too. Only problem is you need some Dawn dish soap to clean it off.

>> No.1418319

>>1416483
Nigga just use coconut oil, it's like $5 a bottle

>> No.1418345

>>1418319
I’m not trying to give her some infection man. If the thing gets infected and swollen for a month, what am I supposed to do? She won’t let me have a side dime.

>> No.1418392

>>1411820
>no kerosene
it's like you're not even trying

>> No.1418402

>>1411318
i got that black tar inside a car door (behind the plastic moisture seal) all over the door vinyl when changing a power window motor. i tried everything in my garage to clean it and nothing worked until i tried white silicone spray lubricant. the tar turned to water and ran off the door. i've been using it for cleanup ever since.

>> No.1418434

>>1418345
Half of the silicone lubricants actually contain coconut oil in it.
Also you arent convincing anyone that the lube is for anything other than using a large black dildo on yourself.