[ 3 / biz / cgl / ck / diy / fa / ic / jp / lit / sci / vr / vt ] [ index / top / reports ] [ become a patron ] [ status ]
2023-11: Warosu is now out of extended maintenance.

/diy/ - Do It Yourself


View post   

File: 3.36 MB, 3264x2448, IMG_4175.jpg [View same] [iqdb] [saucenao] [google]
1135476 No.1135476[DELETED]  [Reply] [Original]

How do I do it myself

>> No.1135477

>>1135476
In the words of SpongeBob, "Floor it!"

>> No.1135478

>>1135476
start with a shovel and a comealong
or
call a friend with a 4x4 and a snatch strap

>> No.1135479

Get yourself an arduino and program it to power on a small spike heater and air mover to dry out the mud at a slow enough rate to not crack the mud and turn it to dust, but enough to harden it to tough soils.

then just drive out.

>> No.1135480

>>1135476
First, stop before you get up to the axle.
--eh-- too late innit?
Board and highlift. or good jack.
Jack car up, fill hole with rocks or put a board under the tire.
Problem is your truck likely doesn't have a real bumper that won't bend when being used to lift the vehicle.

So now you have a choice of waiting till it dries out then digging, or getting someone to pull you out.

Learn not to drive in the bog.

>> No.1135481

>>1135476
Dont buy a Ford

>> No.1135484

>>1135476
Yank it out with a bigger truck duh
Pretty dip shitty thing to do.

>> No.1135486

>>1135476
shove raspberry pis into the mud until you get traction

>> No.1135496
File: 91 KB, 570x779, 1486672020861.jpg [View same] [iqdb] [saucenao] [google]
1135496

>>1135480
Bog?

>> No.1135498

>>1135476

Do you have a bucket tractor? If so just lift and push.

Don't have a bucket tractor? Lift with Jack, fill hole with rock, drive out.

Please don't forget mud will seal around the tire and the vacuum will hold it in. You must break that seal, so grabs shovel.