/diy/ - Do It Yourself

>>1546759
>modern equivalency
>>1547329
Look over in /emt/ and /3dpg/ for decent FOSS CAD solutions (and play with each new software for a week or so before you make a decision).
>>1547235
Is that a nylon screw? Torch a flat screwdriver that's just a little smaller than the screw, jam it in and let it cool. Twist out.
>>1548238
Hi.
>>1548239
Holy shit hey kiddo w24ch 37yo computerfag here. Center screw on faceplate of wall electrical outlet is a ground point. Tether your zap straps and workbench to that.
>>1548292
>Shit nig, there's no problem going raw or should I at least carry a large enough piece of metal?
The computer case is a large enough piece of metal.
>>1548346
Try ammonia. Apply with carpet shampooer, rinse very well.
>>1548409
Nickel acetate is used in sealing dyed anodized coatings. You might contact an aluminium finisher. Copper acetate is used in some solutions for the antiquing of brass and bronze. Some artist or sculptor might want it. Alternatively, evaporate solutions and incinerate the precipitant solids.
>>1548584
Put it in a bag of rice for 24 hours then throw it away.
>>1549364
cbf to watch a video but do pic related: cut red out of wall and cut patch the same size. Brown are wood (paint stir sticks, yardstick etc) affixed to inside of wall with countersunk drywall screws (black dots) to attach drywall patch. Mud edges, skim, let dry, sand, paint.
>>1549384
Never assume. Drill that shit a little bigger, put plugs in that will hold a big aggressive eye bolt.