/diy/ - Do It Yourself

>>2623265
>Should the wheels be further apart for more rigidity
Will avoid at all costs. This is actually a wider and more stable layout than any before at, at the expense of size.
My early tests were all done with a much less stable layout and it was still *excellent*, waaay better than I ever expected.
Keeping within the 72x72mm square gives me enough travel for a lot of weird and fun shit.

>Even if that piece is ABS, will it handle the heat from the other side of the heat-brake?
Oh fuck yes, I've printed a shitload of hotend mounts for printers over the years, usually in PETG, more recently ASA. Not one problem, even when printing ASA with a PETG V6 bayonet mount in an enclosure at 40C. So long as the heatsink is being cooled effectively, the mounting side typically won't exceed 15C over ambient even with print temps of 260C.

>Are you going to somehow combine both driver boards in a master-slave setup (like someone mentioned last thread) to allow for independant driving of Z steppers?
I'd love to. Hell it'd be pretty straightforward with Klipper.
But I have an MKS Monster 8 loaded with TMC2226s just laying around, so fuck all that.