[ 3 / biz / cgl / ck / diy / fa / ic / jp / lit / sci / vr / vt ] [ index / top / reports ] [ become a patron ] [ status ]
2023-11: Warosu is now out of extended maintenance.

/diy/ - Do It Yourself

Search:


View post   

>> No.1281292 [View]
File: 773 KB, 2560x1965, 1451887928573.jpg [View same] [iqdb] [saucenao] [google]
1281292

>>1281284
Pic related was my old workstation.

>> No.1117270 [View]
File: 773 KB, 2560x1965, 1451887928573.jpg [View same] [iqdb] [saucenao] [google]
1117270

I'll post an update pic if I manage to get it looking presentable tomorrow.

>> No.1059430 [View]
File: 773 KB, 2560x1965, 1451887928573.jpg [View same] [iqdb] [saucenao] [google]
1059430

>> No.1000142 [View]
File: 773 KB, 2560x1965, 1451887928573.jpg [View same] [iqdb] [saucenao] [google]
1000142

>>1000074
My lamp is a bit more substantial.

>> No.988287 [View]
File: 773 KB, 2560x1965, PANO #4~01.jpg [View same] [iqdb] [saucenao] [google]
988287

>> No.967082 [View]
File: 773 KB, 2560x1965, PANO #4~01.jpg [View same] [iqdb] [saucenao] [google]
967082

>>966971
I only rent one small room (the shared area is just an open plan kitchen/lounge and a bathroom) so I kinda have everything in here, bedroom, data centre, office, cockpit simulator, recording studio, workshop, exercise area, kitchenette (the shared kitchen is often a biohazard), parts and materials storage...

Most normalfags would be dissatisfied with this arrangement but I'm enough of an Autist that I find it comfy.

Pic related, it's my work bench. Kitchenette/food storage is to the right (convection microwave, sandwich press, fridge/freezer, water cooler/heater), parts storage shelves to the left, bed is directly behind the camera, server rack is at the foot of the bed, cockpit simulator/desk/recording set up is against the wall on the right. The floor between the workbench and bed is covered in exercise matting.

I would be a total NEET if I didn't have a nightshift job and a university course.

The air-conditioner is actually for the whole room since it's over 110F for a lot of the summer. I had to nigger-rig all that ventilation shit onto it because it wasn't powerful enough, especially while the computers are running.

I also run an air filtration system to keep dust down and an evaporative cooler to add moisture to the air if humidity goes bellow 30%. Extractor fans are fitted to prevent solder fumes from building up in the room.

I nigger-rigged a water line out of 1/4 inch PVC tubing, running from under the sink in the bathroom, along the skirting board in the hallway, under my door, to a faucet on my workbench. I run a 0.1 micron filter to provide clean water for my experiments, drinking water to my water cooler/heater/ice maker.

I'm working on a drainage system at the moment, since currently I just have a 2.5 gallon basin under the faucet that I have to empty manually.

>> No.924637 [View]
File: 773 KB, 2560x1965, PANO #4~01.jpg [View same] [iqdb] [saucenao] [google]
924637

Navigation
View posts[+24][+48][+96]