[ 3 / biz / cgl / ck / diy / fa / ic / jp / lit / sci / vr / vt ] [ index / top / reports ] [ become a patron ] [ status ]
2023-11: Warosu is now out of extended maintenance.

/diy/ - Do It Yourself

Search:


View post   

>> No.1339952 [View]
File: 70 KB, 341x162, mcx-sma.png [View same] [iqdb] [saucenao] [google]
1339952

>>1339059
>I bought a rtl sdr and an rg8x cable. What connector do I need to mate the two? The connector on the rtl is really small
It's MCX
You need a pig-tail, like MCX-BNC or MCX-SO239 or MXC-TypeN and BNC/SO239/TypeN connector for you RG8X.
I also bought 24' of RG8X cable, going to install a OCFD dipole for 40/20 meters, will test with RTL-SDR + home brewed up converter. I put type-N connectors on the coax. To make my life easier I replaced MCX connector with SMA, the footprints of the connectors are absolutely identical (so you need just a soldering iron and a 90degrees SMA connector), however MCX is 75 Ohm but SMA is 50 Ohm, not that it really matters for the receiver.

Navigation
View posts[+24][+48][+96]