/diy/ - Do It Yourself

Anonymous Sat May 2 03:41:16 2020 No.1810731 [View]
File: 186 KB, 1600x1172, s-l1600.jpg [View same] [iqdb] [saucenao] [google]

>>1810730
I was going to tap into that plate on the machine, but I cant tap into it obviously. I didnt actually look inside of the machine.
And im not sure where in the casting it would be safe to actually drill and tap.

Im thinking
>make motor mounting plate
>boring 4 steel rods
>bolt mounting plate to the machine, through steel rods into existing holes with longer bolts.

But I have no idea if that would work or not.
Or maybe I should just bout a mounting plate then drill and tap above or below the actual Z axis plate on the machine. Im not sure at all.

Advanced search
Text to find
Subject [?]Search by post subject. Leave empty for any.
Username [?]Search for user name. Leave empty for any user name.
Tripcode [?]Search for tripcode. Leave empty for any.
Email [?]Search by email. Leave empty for any.
Filename [?]Search by image filename. Leave empty for any.
From Date [?]Enter what date to start searching from. Format is YYYY-MM-DD
To Date [?]Enter what date to start searching until. Format is YYYY-MM-DD
Image hash
Search in	All Posts OPs Only
Deleted posts	Show all posts Show only deleted posts Only show non-deleted posts
Internal posts	Show all posts Show only internal posts Show only archived posts
Order	New posts first Old posts first
Capcode	All Posts Only by Users Only by Mods Only by Admins Only by Developers
Results	Posts Threads
Action	[ Simple ]

Navigation
View posts	[+24]	[+48]	[+96]

/diy/ - Do It Yourself

Search: