/diy/ - Do It Yourself

>>1268683
Yup, works differently. The 8Ω-L-pad presents 8Ω at the input side when the output side is terminated with 8Ω. For the 8Ω speaker no resistors are needed because that's the nominal value. For 4Ω you need 4Ω in series with the speaker to correctly terminate the output and 8Ω in parallel to the input to load the amp with 4Ω. For a 16Ω speaker you need 16Ω in parallel to the output and 8Ω in series with the input. Or so I think.