/diy/ - Do It Yourself

>>2014454
It's basically a reprap i3-rework but bigger with a wood frame.
Pic from when I first got it working

>>1735048
Built an i3 rework around 8mmx500mm rods and a wood frame.
$350 from various ebay sellers.(had good records until a hard drive failed)
Actually spent about $450 from buying stuff in bulk because I plan to eventually build something else.
Nice knowing that nothing could break that I couldn't diagx and fix with off-the-shelf parts
You can even get the printed parts for about $25 from ebay

>>1685953
I built this one but bigger with a wood frame
>https://reprap.org/wiki/Prusa_i3_Rework_Introduction/tr
You can even get the printed parts for $20 on ebay
>https://www.ebay.com/itm/Reprap-Prusa-i3-Rework-Printed-Parts-Kit-HIGH-QUALITY-PLA-3D-Printer/132199308676?hash=item1ec7b15d84:g:gJIAAOSwAPVZISzK

Anons are right, It's cheaper to buy one
Smooth rods $60
Motors $50
Hardware $20+
Power supply $20
Electronics $35
Endstops $5
That's $190 and havn't include frame, bearings, heated bed, extra wire, printed parts($20 from ebay), cooling fans, hot end, ect.
Don't think you could build one for less than $300

Here's the one I built, but with a wood frame and bigger
https://reprap.org/wiki/Prusa_i3_Rework_Introduction

>>1526439
2/4