Quantcast
[ 3 / biz / cgl / ck / diy / fa / g / ic / jp / lit / sci / tg / vr ] [ index / top / reports / report a bug ] [ 4plebs / archived.moe / rbt ]

Support us on Patreon!

/diy/ - Do-It-Yourself

Search:


View post   

[ Toggle deleted replies ]
>> No.1664801 [View]
File: 15 KB, 607x388, roll-like-pro-x[1].jpg [View same] [iqdb] [saucenao] [google] [report]
1664801

>>1664712
Have you ever heard of a "drop cloth" you dumb animal? If it's a sealed floor then you're in luck, scrape it and wash it off with a sponge and some soapy water. If unsealed wood then scrap it and go over it with a vacuum drywall sander with 120 grit then lightly with 200 grit or a 200 grit sanding sponge, although if it hasn't hardened then I doubt you'll have to do that. Dunno about oil based but if you used BIN you're shit out of luck and are gonna be in for some sanding.

Protip: In the future use a set up like pic related. Roll the roller on the screen until no paint drops are flinging off. Place roller directly in the center of the wall. Roll up halfway, then down halfway. Repeat again but roll the rest of the way up the wall. Now spread in "W" pattern across wall for 3 roller widths. Repeat on next part of wall, overlapping a roller width. Never press the roller, only let the weight of the roller do the work. Congrats you now know how to evenly cover a wall without getting paint drops everywhere and roller marks. I'm only telling to this because it's obvious that you don't know how, otherwise this never would have happened.

And for fucks sake, at least use a drop cloth where you pour paint and around the roller bucket. What I do is drag a 5 footer tarp around with the bucket so that the area I'm working on has a tarp. Usually by the time I move to the next section the paint is tacky enough to not drip. With edging, if you use a good brush and know what you're doing then you don't even need to tape or tarp. If you drip/drop a brush just have a wet rag on hand and wipe it off within an hour.



Navigation
View posts [+24] [+48] [+96]