/diy/ - Do It Yourself

Anonymous Sun Feb 18 21:40:46 2024 No.2760733 [View]
File: 160 KB, 682x690, 2024-02-18 22-35-55.png [View same] [iqdb] [saucenao] [google]

>>2760636
>Last time it also blew two caps on the logic board
Were they tantalum?

>34V is rather uncommon for power supplies, so I just asked myself if I could just use one with 36V.
Just get a 36V one with an adjustment pot

Those are the specs for a model of the same series https://archive.org/details/manual_P60_SM_NEC_EN
2A at 5V sounds right for the amount of logic on the PCB of the P2
Motors shouldn't draw too much but the hammers will do it in bursts so it needs good peak power

The best idea would be to test the power supply outside of the printer with some power resistor/lamps as loads

Advanced search
Text to find
Subject [?]Search by post subject. Leave empty for any.
Username [?]Search for user name. Leave empty for any user name.
Tripcode [?]Search for tripcode. Leave empty for any.
Email [?]Search by email. Leave empty for any.
Filename [?]Search by image filename. Leave empty for any.
From Date [?]Enter what date to start searching from. Format is YYYY-MM-DD
To Date [?]Enter what date to start searching until. Format is YYYY-MM-DD
Image hash
Search in	All Posts OPs Only
Deleted posts	Show all posts Show only deleted posts Only show non-deleted posts
Internal posts	Show all posts Show only internal posts Show only archived posts
Order	New posts first Old posts first
Capcode	All Posts Only by Users Only by Mods Only by Admins Only by Developers
Results	Posts Threads
Action	[ Simple ]

Navigation
View posts	[+24]	[+48]	[+96]

/diy/ - Do It Yourself

Search: