/diy/ - Do It Yourself

>>2555122
For anyone else who is wondering and doesnt want to look it up.

The aforementioned Kobalt 7-1/4" sliding miter saw has a crosscut capacity of 2x8"
So you can cut 8" baseboards with it.
It has a 90deg cut depth of 2", so you arent cutting baseboards vertically with it.

The aforementioned Dewalt 12" miter saw has a crosscut capacity of 2x8"
So you can cut 8" baseboards with it
It has a vertical cut capacity of 6-1/2" so you can cut 6.5" base molding with it

Its always good to have hard specs on things when shopping around.

https://www.lowes.com/pd/Kobalt-Compact-Sliding-7-1-4-in-10-Amp-Single-Bevel-Sliding-Compound-Miter-Saw/1000553513

https://www.lowes.com/pd/DEWALT-12-in-15-Amp-Single-Bevel-Compound-Miter-Saw/1001053564

>>2552980
Holy kek
The cope in this post is off the fucking charts.
It must be bringing up that "existential dread" you were talking about earlier.

>>2523456
me not anon who say buy "cone" bit
"cone" or "chwistmas twee" both be 1 2 or 3 floot
floot work same way if step or no step

I hope thats simple enough for you anon.

>>2501375
>replacing a thermostat on a $200 freezer is a herculean task
Look at the retard who is on the wrong board.

>>2462384
>i have no retort, only a soijak picture

>>2453884
mfw I didn't realize it was past the bump limit

>>2453497
posts
>"Snap On bolts their together in the US for that “Assembled In The US of A” stamp"
as a reply to a post that shows that exact jack he is talking about being labeled "made in china" on the website

And has continued to rant and rave and pretend like he didnt do so.
I know you assumed it had the "assembled in USA" sticker on it, but it doesnt.

You backtracking and saying "well they sell some tools with that label, so it might have said it years ago!" just makes it look even worse.

The worst part is, the whole discussion was to teach mudhut man the FTC labeling laws, and explain how the core snap on tools are straight labeled "made in the USA" and not "qualified" aka "assembled" or "built".
He was making baseless claims that SnapOn was breaking FTC regulations because he has no clue what he is talking about.

You are a retard if you look at their jack or some ratchet straps or a flashlight that says SnapOn and think it has any bearing on their actual tools they actually make.

Yet since you fucked up and you misread the post, you were never on topic in the first place, and now talking in circles about something irrelevant.
So good on you.

Youve come in made the point that Qualified USA labeling exists (on a jack, even though it doesnt actually have a qualified label on it), said SnapOn has used it before, and thats pretty much it.

Your typical Bepis pretending to know what he's talking about post right here.

>>2452654
>People give you use cases and you immediately ignore them
I didnt ignore them, I typed up a response explaining exactly why its a bad idea.

But you werent actually going to use that garbage as a home media server anyways, so you just mentally shut down, get offended and call it a "rant" that "says nothing" because you didnt like someone else calling you out.

Im going to go out and buy a new hard drive to upgrade my rig for a media server
But because it has a slow HDD and a slow NIC, and a slow processor I wont encode with it and will only serve small files with it
And because it eats a lot of electricity it wont be on all the time.

What exactly have you accomplished besides throwing away your time and money?
Oh right, its all about getting the dopamine kick from hoarding garbage, not the actual object or its use itself.

>>2401795

>>2024463
>He did videos to show how awful chink welders are you lying kike.

He had videos that tell people that *insert any non-Everlast or HTP welder* is crappier than his ~10 Everlast and HTP welders he had been sponsored with and given for free.
Did you not even watch his channel anon?

This board hated the fuck out of this retard before his /pol/ stunt, at which point a bunch of /pol/tards started having revisionist history.

My favorite is when he larped as knowing how to machine, but couldnt understand how to use a tailstock. That was a fucking riot, and indicative of his overall mediocrity.

>>2013038
Nice work

>>1968067
>youtuber gets tiggered when he realizes most people dont give a fuck about kiddie youtubers
We get it, Nord VPN may have convinced you that you are a big deal. But you really arent. The Youtube bubble has made middle aged women who review sex toys as big and successful as you anon.

You can continue to cope by saying >muh money, but that doesnt really change anything.

>This is another thing I don't understand. There's always some faggot whose never made a mistake ready to call someone else a retard for posting one of theirs
I love it.
You post your mistakes on the internet for the world to see, milking it for money.
Then surprised when people point out your failure?
Then you are sitting claiming you dont care what your peers think?

Big but quite fragile ego I see.

>>1891483
>goes on a tirade about country of origin
>posts pic of a crappy 10 year old craftsman rotozip thats country of origin is "assembled in mexico"

You just CANT make this shit up!

>>1885059
Very jealous, a young kid taking a line of credit paying 1400% more money (before interest of course) for the same exact functionality of other toolboxes.
Just like you feel extremely jealous when a nigger walks by with his BAPE hooded sweatshirt and his Yeezys on, driving around with his donked rims!

You look like a nascar pitcrew boy, do you work on ferraris with that toolbox!?

>>1617134
>>1617132
>using liquid cash to buy a home outright
Do some research in investing and financial independence friend.
I wouldnt want you to retire at age 70 like all the other retards who refuse to play the game.

>>1355839
>covering topics you dont understand
>so that you can learn from people in the comments
>because you created a Larry The Cable Guy tier persona

>and people fight tooth and nail to defend this hack

He's popular so he's good!