/diy/ - Do It Yourself

>>1358585
Eh I got the forks apart and rebuilt. Just didn't post here. Gonna replace the front brake rotor+pads+longer 35.5" ss brake lines. And raise the handlebars some. The ones I bought had WAYYY too much pullback. Made me sit on the outside of my wrist.

Side note I adjusted the rear tire because the bike pulls to the right when I let go off the bars and that didn't fix it. Didn't use to do that. Forks don't look bent when I measured them with a straight edge off the bike. Gonna unclamp them and turn them 1/4 each side at a time to see if there is some slight bend and hopefully fix the issue. Under hard front braking you can feel the tire drag to the right too. Somethings wrong. And I have one of those fork oil measuring tools I bought when rebuilding the forks so there's no way the fork oil is off by that much..

Another possibility is the steering head bearing is crushed and odd shaped now. And needs replacing.

Front rotor is beyond gone... Floating? Straight up pad knock.. Spongey as hell.