/diy/ - Do It Yourself

>>1463469
Mosh mosh!
Self Lapidary in Training Anon here!

Stainless Steel huh?

Hmm.

Well, that's hard to edit larger anon. Sad! But don't worry! You can make a new one! Yes! Very true! No lie!

Decide on how you want to do this, via the molten mold method or the material bending method!

MMM: You will need to purchase Stainless Steel (available many places! Spoons, Knives, Forks, Pots and Pans!) And you need to melt the material in a crucible. Do you have a crucible? You can buy one or make one from scratch! Very simple! Very useful! You melt the material in the crucible, (Very hot! Wear Protection!) and pour the material into a ring mold! (Make one from stone/wax/plaster!) Once you've poured, let it cool and hit it with water! (Watch out! Steam!) Break the mold with a hammer, Tada! A Ring! Hooray! Polish and sand it down! Huzzah! A new ring!

MBM: This is much simpler yes yes! Purchase material (Many places!) Heat it with a blowtorch. (Hot hot!) Bend it around a rod with a higher heat temperature than your material. (Tungsten tungsten!) Do not melt the material, only heat to moldability! Mold around the rod! Hit it with a hammer! (Clang clang) Hit it with water! Tada! You have a ring! Yay! File and polish! Shiny! Hooray!

Another method, Hole Punch!
Find large material with right thickness. [Sometimes hard!]
Find a puncher! [Bap bap!]
Punch out a ring! Wow!
File and Polish!

Saw Method
Similar to Punch Method!
Use a Saw to cut a hole in thick material!
Wow!

Hope its been helpful! [much much!]