/diy/ - Do It Yourself

>>1557529
>>1557519
Why is this thread so full of retards lol
https://www.homedepot.com/p/Milwaukee-M18-FUEL-ONE-KEY-18-Volt-Lithium-Ion-Brushless-Cordless-3-4-in-Impact-Wrench-w-Friction-Ring-Tool-Only-2864-20/303651984

>>1557519
https://www.milwaukeetool.com/Products/Power-Tools/Fastening/Impact-Wrenches/2764-22

>>1557502
They do make a 1 inch, it's not on the market yet, it was announced late last year.
They make a 3/4 but it's the exact same gun as the 1/2 but with a bigger anvil.
God damn retard lmao

>>1557498
Ok_retard_doge.png
Get naenaed xaxaxaxa

>>1557091
It will loosen a 1400ft lb nut, it takes less than 1400 ft lb to remove a fastener that's torqued to 1400.
This is a fact.

>>1557375
See
>>1556992

>>1557296
I can comprehend why it's good obviously, I'm just saying it's not really necessary.
I think they just did it as marketing 2bh, same reason homeboy here is sperging out over 18 vs 20

>>1557282
I understand that, I do a shitload of electronics work, I undertand wire ampacity and reaistive losses, but it's not that big of a deal, you can deliver enough power easily through the 18v system.
I've never ever seen a burned up electrical contact where the battery plugs into the tool, and that's exactly where it would burn up under max load if it were going to.

Also lmao for dewalt niggering a loophole like that, its still a 160watt hour battery no matter how you label it.

>>1557284
Brainlet confirmed

>>1557246
The draw on these batteries isnt high enough to justify needing higher voltage, it really makes no difference.
What the fuck are you talking about getting around shipping large batteries lol
You have no fucking clue what you're talking about.
There is a watt hour limit batteries, it doesn't matter what the voltage is, the watt hour capacity is all that matters, voltage is irrelevant.
>>1557248
Congrats on being low iq and falling for dumbass marketing
18 and 20v batteries are literally the exact same thing, zero differences.
https://cordlessdrillzone.com/drill-wars/20v-max-vs-18v-batteries-which-is-more-powerful/

>>1557242
18 volts is the nominal voltage of a 5 cell series lithium pack, 20 volts is the same battery but they are advertising the fully charged voltage instead of the nominal voltage.
Basically you're retarded.

>>1557214
>put all batteries in series
>the voltage is higher so it's better now
It's still the same overall power, just configured differently

>>1557226
If you never touch a car sure

>i dont have tools or experience can i build a car from scratch
That would be a no.
You literally need both of those exact things.

>>1557123
Sperg more for me, I love it lol
I'm better than you

>>1557082
I'm not a weeb?
Nobody laughs at my tools, what kind of fucking environment do you work in lol
Sounds like you're asspained that Milwaukee tools are the best objectively and cost the least when you wasted money on an inferior product.

Milwaukee is the only power tool brand that fully embraces mechanics and tools geared towards them.
Every other brand skirts around automotive but Milwaukee is the only major power tool company that has that field completely under lock

>>1556925
Similar to hammer, slapping file, made from an old Nicholson file bent with oxy acetylene

Proto cross peen body hammer, got off offerup.
Trying to get some martin hammers and dollies right now 2bh

>>1555699
Actual welder/fabricator here, you can't really use flux or stick weld for thin metal, it's always gonna be total dog shit.
Both processes are more for industrial use like building gantry and mezzanines.
Thin metal you need mig or tig.

>>1556471
Go weld up some aluminum intercooler tubing with a spool gun and get back to me.
The 300 dollars youd spend on a spool gun setup should be invested toward an alphatig or a primeweld 225 or similar ac/dc tig machine so you can actually get decent welds.
Spool guns are for production environments not automotive fabrication in your garage.

>>1035578
this

>>907821
lmao nice find
:3c

>>907700
Do you have no reading comprehension?
We are smashing the ponyfag, not encouraging it.

>>907696
>calls me a benchracer
>am not actually a benchracer
>gets butthurt even further
You are really mad.

>>907688
I'm def from /o/ but how am I a benchracer?
To keep in-line with the original purpose of this thread, here is my work bench.

>>907687
It's second life.
I'm Mrcrummypaws and he is FFCCSa1F