/cgl/ - Cosplay & EGL

Good luck with finding an answer OP, I had a reference guide saved but I cant find it now...

My question is what paint can be used on dried paper clay to make the clay look metallic or plastic? Im making a power suit

whats the recommended time to repost a help request after the old thread has died?

>>8396386
Immediately to prevent retardards from spammnig the front page. Nice passive-aggressiveness.

>>8396386
When the old one starts Autosaging. Normally people post the old thread in the first post.

Anon >>8386040 about the straw. I wanted to try to make it myself because I can image something like this costing me a good $100+ and I'm already paying enough for cosplays and hotel rooms. I don't need this prop until mid 2016 to answer your question.

Old thread >>8377425
Unanswered questions:
>>8377810
Boots help from Puyo
>>8378078
>>8383569
>>8385494
>>8385917
>>8385923
>>8385943
>>8388968
Collar for Hime from Aldnoah Zero
>>8393783
>>8394511
>>8395924

Minami Kotori anon you still here and you still need that wig? You never responded back.

>>8396408
No not repost the thread tard. Repost an unanswered help request from the end of the old thread.

I'm not passive agressive, just regular aggressive.

>>8396419
thank you for posting the unanswered questions, very helpful.

>>8396429

Ahh my mistake then, sorry for the sea-salt, bad day.

>>8396419
Damn I missed one:
>>8394472
Guessing this anon wants to know how to wear an open top cosplay.

Does anyone know where I get get these reference files? I need them to make a cosplay. http://page7.auctions.yahoo.co.jp/jp/auction/g145273140

>>.8396371
Seal the clay first (I use Collage Pauge because it self-levels a little bit, but various people have varying preferences) so it doesn't soak up the paint like a sponge. If you're looking for a standard metallic colour (silver, gold, sometimes black), you can get spray paints from a hardware store that leave a nice metallic sheen. If you're trying to achieve a non-standard metallic colour, after priming your clay, spray with a coat of silver or gold metallic, then spray your colour over that. There are also a LOT of spray glosses and finishes that will leave different effects.

>http://www.cosplay.com/showthread.php?t=216749
You might want to give that thread a read-through, I BS'd the bit about priming with metallic paint and spraying over that; not sure if it would actually work. Rub n Buff will definitely give you a shiny surface though, and the same from glossy spray finishes.

>>8394472
>pushin up dem boobs
>http://aicosu.tumblr.com/post/59064621699/
There's magical boob tape that basically anchors your boob to a patch of skin higher up and keeps it perky. I've never used it, but I've seen photos (likely with some photoshop help) and it looks legit.

>>8393783
>Blake fabric choices
My eyes are spinning from that turnaround. @_@
I'm guessing you'd want to interface the jacket to make the collar stand up? I think you should be able to fuse interfacing to it alright, especially if you trap the interfacing in seam/hem to keep it stable. I like the idea of using a nylon blend sports fabric (if there's one in the area, JoAnn has white sports-style fabric right now), but it also looks like it could be some sort of lined silk jacket.
Skirt: Purple tulle and/or chiffon bunched up underneath black sateen or black satin If you want to preserve the floaty skirt effect, a seagull wrote a tutorial about using wonderflex and heavy-duty interfacing:
>https://spazzerbot.wordpress.com/2014/08/15/the-making-of-falsetto-1-the-floating-tails/

>>8396584
The one response to a post in this thread and I can't even link it properly. >>8396371, check >>8396584 for some suggestions.

>>8396584

Thank you for the clay paint advice!

>>8396584
Yeah, but can you iron nylon? That's sorta what's worrying me. And if you can iron nylon, can you iron it at a hot enough temperature to make sure the interfacing actually fuses?

Sidenote: Do you know what the name of the fabric is at joanns? assuming it's listed on the website. I kind of check the site obsessively.

>>8396987
i feel like i accidentally sounded rude sorry

Where can I find a half mask like this?

Everything I find online is a thick material and has holes in it.

Do most people interpret Jolyne's pants as leggings/tight pants or loose pants? I thought that they were more of loose pants, but I've seen a lot of people use tight pants/leggings for cosplaying Jolyne. I'd like to go the loose pants route, but I'm thinking that it might be more difficult to do the cutouts on the side of the leg in pic related that way.

Is there a way i can make my own zentai-like bodysuit or do i have to purchase my own? Im on kind of a budget. Thanks in advance!

>>8396584
I have a similar question with painting paper clay. Does spraypaint give it a plastic look? Ive heard that it shouldnt be considered.

Guess in just requesting paints that make clay look plastic? Thanks in advance!

>>8397665
Check stretchy.org. If you're not an experienced sewer, just buy one from zentai-zentai.com.

How do I get a collar to stand up like this?

We have a badass base for a huge mallet and nothing to do with it anymore. What are some cute cosplays for a small girl with a huge mallet? (even better for things that light up; it's fully collapsible and capable of hidden wiring)

>>8397701
Try some stiff interfacing or some wire? I think lining it with a firm interfacing would work. Since the collar size isn't too dramatic it shouldn't take much to keep it up on its own.

Any ideas on how I can do the bottom hem of the skirt with the maroon ribbon? Cutting strips and sewing it directly on isn't looking as great as I thought.

From last thread...
I'm going to be making some larger size Angel wings this summer. Any one with experience here? How many did you order and from where? Imliking for opinions from someone who has ordered before or knows someone.

I'm planning to get a mix of down, smaller feathers and larger long ones, but I'm stumped about where is good quality out how much to get.

>>8397627
From your picture, they look like skinny-jean-level tightness. But you'd still be able to interpret them as loose slim-fit pants; just interface around the holes or do a facing to keep them stiff and prominent (unless your fabric is stiff already).

>>8397719
I interpret your ref as having the ribbon sort of woven in and out around the hem (like a running stitch). You could measure and mark off the distance between the ribbon "appearances," sew a bunch of buttonhole-style slits, and thread one long piece of ribbon through.
>it's a little bizarre that the ribbon doesn't appear on the inside of the skirt, but I don't think the designers were thinking about real clothing when they designed that outfit
That's a super cute outfit, though - I love green and pink and brown as a colour scheme.

>>8397715
>http://tvtropes.org/pmwiki/pmwiki.php/Main/DropTheHammer
The first characters that come to mind are Harley Quinn (DC) and any of the Super Smash characters (with the Hammer).

>>8396987
You can iron nylon! Use the lowest heat setting and have a press cloth between the fabric and the iron. (you can always check the iron-bility of fabrics with "can you iron [fabric]" in Google)

>>8397719
I've seen skirts of similar design, with ribbons like that. People just weave it through little cuts on the hem

>>8397715
What would I make the interfacing out of?

>>8397735
Are you actually retarded

>>8397737
No, just new. I was wondering if someone had experience with it. This is a help thread, Salty cunt.

>>8397735
Interfacing is a material. You can buy it in any craft/fabric store.

>>8397719
Make button holes and thread the ribbon in and out.
Or seal lengths of ribbon ends by flame or seam keeper? ( whatever the edge glue stuff is called) Then attach those with iron on applique stuff and secure each end with a button hole like stitch.

>>8397754
Lurk more, stop being underage.

>>8397763
Thanks. I thought that was just another way of saying reinforcement or something.

>>8397133
http://www.amazon.com/Cosplay-Naruto-Hatake-Kakashi-Sensei/dp/B00M0FAGR0

It goes up over the eye, but you could easily pull it down so it does what you need. Or make one yourself out of a light knit.

Does anyone know where I can find a simple pattern for a bunny suit? I got invited to be part of a group and I'm still pretty new to sewing on a machine.

>>8397665
You can but its not super easy. How much experience do you have sewing?

>>8397871
Bunny suits are fucking hard. You're going to have to draft one yourself. They rely on a perfect fit to look good. Googling "bunny suit cosplay" brings up some tutorials, you can pick one you think you can follow.

>>8397896

Admittedly very little, im better at making props and armor than with sewing. I also dont have anyone competent to help if needed. Im willing to try and make my own if theres very clear and detailed instructions and advice though

>>8397921
There are some commercial patterns out there (I personally used a Kwick Sew pattern which is now out of print and added sleeves and a zipper), but you'll definitely need to adjust and improvise. What is the zentai suit for?

>>8398022

Oh looking up commercial patterns is a good idea, I'll look into that. Im making a power-armor type superhero suit so the zetai suit is for detail and to prevent chaffing. Im gonna make foam details to put over it from patterns I found online, gonna be fun~

But yeah its just debating whether to make one myself or break down and buy one.

>>8397684

Forgot to mention I found a decent one at the website mentioned here so if all else fails I will just order one (thanks for the suggestion!)

>>8396297
Can anyone help me figure out a way to wear zoro's swords. because I am finally done with everything. And now I realize how hard it is to wear them with a suit without looking like a dork

>>8397133
You could use a black T shirt method to make the mask.

If your character blazer doesn't have pockets is ok to purchase one with pockets? Or do you think it will offset the look? Also do you think this jacket is ok for chiyo?
http://m.ebay.com/itm/151696375185?nav=SEARCH
Also would a size 6 fit a small 5'2 100 pound girl? (Sorry for so many questions I've never tried on a blazer much less purchased one)

>>8396782


http://item.taobao.com/item.htm?spm=a230r.1.14.148.qcvggB&id=45513410004&ns=1&abbucket=7#detail
Bought wigs from the above seller. Good quality and not shiny.

Other wigs from Taobao
http://item.taobao.com/item.htm?spm=a230r.1.14.42.WEjrgV&id=45278898701&ns=1&abbucket=7#detail

http://item.taobao.com/item.htm?spm=a230r.1.14.56.WEjrgV&id=40442232346&ns=1&abbucket=7#detail

http://detail.tmall.com/item.htm?spm=a230r.1.14.52.qcvggB&id=39325071077&ns=1&abbucket=7&sku_properties=134942334:28383

http://www.ebay.com/itm/Love-Live-Minami-Kotori-Styled-Flaxen-Colour-Cosplay-Lolita-Party-Wig-/301253443925?pt=LH_DefaultDomain_0&hash=item46241ac155

Tell me if you need more.

>>8398068
If its not the focal point of the costume don't worry too much about it. They're tricky, and a little time consuming, but if you want to save a little money you can make it yourself. Buy a pattern, get yourself a ball point needle, and give yourself some time to make mistake. I believe in you!

>>8398170
It's ok but the lines are really bugging me in the blazer. But that's only my shitty opinion.

Also I think Chiyo has pockets on her blazer (in that picture.)

>>8398170
Size 6 is pretty big try a size 2/4
Tbh I would just go to like Ross/marshalls and shit they have a lot of office clothes for cheap plus you can try them on

>>8398179
Oh you're right I think I can kinda see them on the side if you look rly hard. It bothered me too but I think it's just the fabric of normal Blazers.
>>8398180
Oh I didn't think of that! I always go to Ross for teen clothes I've never looked into their older section so thanks! Also thanks for saving me on the size

>>8398187
Good luck anon. What are you going to do about the school patch though?

>>8398204
People make the patch by itself so I was probably just gonna buy one of those and sew/iron it on. I Dont know how to sew and sakuras outfit is to plain to justify buying a cosplay set. So i'll make it work. Thanks for the help again.

I'm having trouble getting my sleeves to fit properly. The fabric on the body keeps bunching up under the armpits and the sleeve kinda twists a little (or atleast looks like it) going down the upper arm. Is it because its too small somewhere?

>>8398222
This is super basic troubleshooting, but I've legit had to help three separate friends who thought sleeves were just rectangles before - you're using pic related (or some variant) as your sleeve base, yes?

If the fabric on the body is bunching under the armpits, it sounds like the armhole is too small. Does the bodice fit at the arms both when you have your arms up and when your arms are down by your sides?

If the sleeve is twisting, that might be because the sleeve cap isn't wide enough. Depending on how large your chest is (and thus how much your chest will be pushing out the armhole) and how large your biceps are, you might need to increase the amount of fabric "give" the front half of your sleeve pattern.

If it's none of those things, mind posting a picture of your sleeve attachment area?

>>8398324
Yes and I think so?

I have a feeling the sleeve cap on mine is pretty wide, maybe too wide? My phone's camera is being wonky, but I took a picture of the patterns last night. The second, fainter line was where the old sleeve used to be.

>>8398176
Probably buying the first one (found original seller)
Thanks for the help anon !

>>8398378
Your sleeve cap might actually be too short!
>with your arms down at your side, imagine a line that starts at your armpit and -parallel to the ground- circles your bicep
>measure from the top of where your armhole is (when you have the bodice on), along the outside of your arm, down to that imaginary line
>sleeve cap should be that tall

If that doesn't work, post a picture of your bodice (namely, the armhole area) next to the sleeve pattern that you've made and I'll try to keep guessing at it. :)

What do you call that see through material they use for masks and hoods and stuff?
I'm making a mask where the eyes are going to be all white and wanted whatever would allow me the best vision possible.

>>8398406
That actually is on the bodice, I had the seam allowances aligned to make sure they'd fit when I put it together.

Finally got my phone stop bugging out the camera.

>>8398178

Aww thanks! Im gonna try it. Cheers!

Been looking at tutorials,but can't seem to find how to make the draped part of his cape on the front

I'm trying to use this class finder from Hancock fabrics to see if there's a sewing class around my area, but the map won't display on my screen. Can anyone go to this link (http://hancockfabrics.com/class-finder/class-finder.html)) and search for zip code 78717 and screenshot what they have for me? Thanks!

Okay somebody here has to have made or thought of an Elsa bodice by now. I'm trying to plan out how I'm going to do those flake scale things, like im making the corset top but what/how will i cover it with... I'm doing research here but there so many god damn options I just get tired

I'm specifically looking for a method that will have longevity, (I'm nervous about using just glue like i've seen some ppl do, l like the idea of beads but i'm a little hung up over the holes showing gls;jf,sl) i need it to be able to handle a very gentle hand washing every once a while

Fucking detailed HD CGI bullshit. Anyway, any recs for materials? Can anyone attest to the durability of sequin/sequin sheets? Like will the paint rub off are they even painted i have no idea im going crazy

>>8398791
I used satin, then hand sewed on sequins. TBH that's the best way. Gluing is a bad idea. Sewing allows you to get movement.

>>8398378
Something I just noticed from your first picture with the patterns - your sleeve turns suddenly narrow once it hits the bicep part (when compared to the width of the sleeve cap). Is there a reason for that decrease?
In the pattern I posted in >>8398324, the base of the sleeve cap has a more gradual decrease towards the wrist, and it looks like your pattern in >>8398378 has a fast taper into the bicep. I think that's taking away some of the ease in the upper arm area, so the sleeve is eating into itself to try to accommodate for that. With a nonstretch fabric, a comfortable sleeve taper should extend smoothly from armpit (the width of the sleeve cap) down to wrist (whatever your desired final sleeve width is, plus accommodations for getting your hand through).

>>8398437
Knit jersey (it'll feel like super slippery t-shirt fabric) or mesh. You could probably also layer a few pieces of white tulle or netting. But no matter what you use, you'll still have a pretty limited field of vision (and it'll be blurry to all hell), so if you're wearing your mask to a convention, you should either keep it off when you're navigating hallways or have a buddy to be your handler and guide you around.
>used black jersey underneath for a Witch King of Angmar helm
>couldn't see further than ten feet in daylight

>>8398791
For sequins (and rhinestones and general refs) themselves, check
>http://yaexrae.tumblr.com/tagged/elsa
for suggestions. She detailled a lot of her process and research, though it looks like she stopped selling the sequins because she never received her last order of sequin film.

>>8398898
This is sleeve guy, My first attempt ended up having too much fabric around the biceps, and I was planning on tying some fabric around it and wanted to avoid bunching there. I remade the pattern with a smaller bicep and it fit pretty okay, but the armhole/shoulder area was too small (this is the faint line in the pattern image). So then I tried one with a taller and wider sleevecap, which ended up bunching up. The taper was my latest try at trying to get rid of it by making the armscye longer.

>>8398943
I forgot to mention that when I took the sleeve off, the armhole edges on the bodice folding over when my arms were down.

>>8398797

Very cool, anon , how long did it take you to do the whole bodice if you don't mind me asking? :)

>>8398898
Awesome, she does seem to have closed her shop but I found plenty of other sequence sources, still seems like a great resource, thanks a ton! :)
Does anybody have any advice and/or product recs for fabric painting with glitter? (Elsa cape snowflakes) I've done it before with using mix of fabric fusion glue, glitter, and a little bit of white fabric paint (with more glitter poured on top), it worked great on a stretch mesh garment but on sheer polyester it eventually began to crack :( maybe I should try a more porous fabric?

I'm trying to make Seth's weapon but I'm not sure how to make it transparent like in the picture? Does anyone have any experience with this?

>>8399217
Try using sheet acrylic and a laser cutter. It won't be as sculpted, but it's easy and clean. Look for some resources in your area! Another option is to sculpt them out of clay, make a mold, and pour tinted clear polyeurethane resin into said mold. However, that could go wrong very easy, and it'll be expensive and time consuming.

Attempting to make Linca's sword but not sure what materials to use and how to go about it. I want it to be lightweight so I can stow it on my back whilst on public transport to and from the con.

Planning a first time cosplay of Madotsuki. The costume shouldn't be too difficult. How should I approach the hair?

>>8399037
Oh god, entirely too long. About a week-two weeks. But I sewing during lunch breaks at work, then dedicating time after work. I work 9 hour days m-f so you can factor it there. I got the sequins from china, by the pound. I have a shit-ton left.

Also, I used one of those curved leather needles--its a lot quicker than a straight needle. I also used clear thread--which is harder to work with, but looks better.

>>8396419
wrt Asseylum collar, it's a standing ruff. If you're hardcore, you can use wire like a proper Elizabethan standing ruff. I made mine with satin over furniture interfacing (the hardest interfacing at Joann). It's flexible, and hasn't drooped once after three cons, two roadtrips, being stuffed in a duffel bag, and being stuffed under my bed. There are a fuckton of things wrong with my ballgown, but at least the ruff stays standing up.

>>8399801
>buy brunette wig
>braid it
>???
>wala

>>8399816
Wow i was expecting longer @0@ everytime i take on a hand-sewing heavy project i convince myself it'll be worrh it /c ill get better/faster at it, not sure if its true though

Help thread pulled me out of my sequin anxiety and got me excited to start this project. I wasted 2 hours of my life last night just looking at fucking rhinestones

>>8399924
>wala

>>8399941
WALA

>>8399932
Thats awesome! Yeah I will say my hand cramped so damn bad. But it was worth it! We used iron-on shimmer fabric to do the cape. Also I will say, you should add some fabric to the side of the cape, where it connects under the arms. Any of the fabrics that you use for the shirt part are going to generally be very fragile/easily snagged, and it will get snagged like hell on the sequins from the corset unless you a) leave an open space on the corset where your under arm part will hit or b) add the fabric. Which is what we did. The first shirt was ruined by the snags, so we realized the mistake and did the fabric add. A tiny bit of simple blue cotton worked and you can't see it when worn, really.

Also--you dont have to sequin the *entire* corset. The last two panels (where the eyelits are) can be left uncovered since they will be covered by your cape.

This is a bit of a request for general advice. I'm doing my second cosplay and I want to dip my toes into a bit of wig styling. I don't want to be the person in the fresh out of the bag wig.

Are there any guides or tips on just generally styling a basic bang/med length curled wig to look nicer? Most I can find are specific to more advance character specific styles.

>>8400063
Try the archives with the wig threads or >>8394688. Also look up Arda wigs tutorials.

Stupid question but better asking it than trying on my own and fucking everything up.
I will cover my blade in worbla, but I need dents and scratches on it to look used. Do I do these dents and scratches directly on the eva foam, before I cover it with worbla and then I just press the worbla to take in the dents or do I do they on the worbla with a dremel or something?

pic related
Hey cgl. I want to be lili from danmachi but i have no idea where to start. I'm a complete beginner at sewing/patterns/etc.
1. how do i make a stand up collar for her cape?
2. how do i make her distressed tank top ?? I can only think of ghetto scissors which is prolly not a good idea
3. what fabric do you think her skirt should be? i was thinking denim but no one sells red denim skirts so im stuck.

>>8400500
Get a basic cape pattern from Simplicity/McCall/Butterick and they have hooded cape patterns. Apply heavyweight interfacing to the areas you want to stand and a bit below them as well for support.
Since you're a complete beginner, you don't have to worry too much about the tank top, as it is mostly hidden from view. Google "how to distress fabric" and use a material that won't fray badly when you wear it.
For the skirt, look around for dark red/burgundy denim. You can get a twill and line it for more weight. You can even get a heavyweight ponte knit since it looks like it needs to stretch over her butt when you sit down.

Hey everyone I'm casting a sword in silicon to make a clear version. Does anyone know a way to make a hole in the final product and still have the mold be able to come off?

Basically the guard and blade will be one piece, but the handle or grip rather will need a small hole to attach into since it will be a separate piece.

I'm not sure how to design the mold to basically have an indent for the handle to go into and still have the two pieces of silicon pull art.

Would very much like to avoid needing to drill the resin after its done as it could rough up the resin too much and generally be a pain in the ass.

What is this type of school uniform tie thing called? Im trying to buy a white one.

so im trying to make this mask for ebisu but im trying to think of a good way to make the jaw movable since i think thatd be cool to do. suggestions??

>>8400810
you're going to have to do a 2 sided mold, pal, sorry. It's probably for the best, and t'll be easier to see if there are any flaws in the mold before you pour.

>>8401405
Two sided as oppose to two part?

Meaning have the mold only do half of it and then resin one half then another half and fuse them together somehow?

Or am I misunderstanding.

>>8396419
>I wanted to try to make it myself because I can image something like this costing me a good $100+ and I'm already paying enough for cosplays and hotel rooms. I don't need this prop until mid 2016 to answer your question.

Really should not be that hard. But might be hard to make it flexible.

>>8401387
Use a hinge.

>>8400810
Eh, sounds like a waste. Resin is expensive. Try to see if you can make it with plexiglass first.

>>8400295
While I'm not an advocate for using worbla for swords, I'd probably just take a dremel to it afterwards rather than the other method you're suggesting. It doesn't make sense to have "scratches" where the surface in these spots is still perfectly smooth and undamaged.

>>8401268
You mean the scarf or kerchief?

>>8401387
What is this from? It looks awesome.
Sorry for no contribution

>>8400810
I feel that a simple hole the size of a small rod or similar will fail you, if the sword has any decent length to it. You're going to put a lot of stress on it and it'll be prone to snapping.
If I understand you correctly, the handle/grip will also be transparent if so drill the hole in the master version. Make the two part mold with the hole already placed.

>>8402089
Off hand how much would it cost to get this made and be flexible?

>>8399678
Foam or worbla depending on how you do it should be light weight enough.

>>8399678
Oh forgot to add it's still going to be sort of a hassle regardless because of the size.

>>8399307
>Try using sheet acrylic and a laser cutter. It won't be as sculpted, but it's easy and clean. Look for some resources in your area! Another option is to sculpt them out of clay, make a mold, and pour tinted clear polyeurethane resin into said mold. However, that could go wrong very easy, and it'll be expensive and time consuming.

Would this process also make the patterns inside too? I'm trying to make it as close as picture related.

>>8402089
Well I wanted to make more than one in case it gets banged up. Is there a good place to buy pink plexiglass?

The idea is the handle is PVC and I'm running a UV LED and battery on the inside and putting it into the guard/blade which will be transparent. I've seen one made of pink acrylic that was pretty cool, but fuck if I find a place to buy it some. Do have a saw that could cut it though if you have any ideas on a source for plexiglass or acrylic sheets that isn't like a giant 100 dollar white board.

>>8402591
That is what I was thinking about doing, but I don't know if the silicon halves will pull apart if they are going in a hole, assuming the seem is along the side of the blade. Unless the seam wasn't along the side of the blade, but rather between the guard and blade though that may be hard to do.

The hole could be up to 2in, the guard is thick. Blade is about 23in long. Maybe I should just fuck lighting up the prop with it being for first really complex piece and make it a solid transparent resin piece.

Or I could frost the outside with a piece of sandpaper and stick the UV light in a glove. Or make the whole hilt opaque. This makes my brain hurt.

>>8402190
Why not use worbla? My case is a blade for a spear, but I'm still curious to why. And I didn't understand, do you think it would be better to make the dents after the worbla, right?

>>8402742
My friend made hers would clear plexiglass dyed with alcohol ink. You don't really saw plexiglass you score it and snap it. She glued gets with a silicone adhesive. She tinted it with Jacquard alcohol ink.

>>8400295
Eva foam isn't really for swords and worbla has a terrible texture that needs many layers of primer and sanding to be smooth. Swords should be wood or insulation foam

>>8403078
I really forgot to say that it isn't a sword, it's a little blade that goes with a spear, so I think worbla would be fine.

And while I'm here, anyone have any tips on how to make spikes? I wanted to make them out of eva foam but I suppose there isn't a pattern for that and it's impossible.

Can anyone recommend a good wig for her? I've been looking forever and I can't seem to find one I'm satisfied with. Thanks in advance!

>>8396545
usually make the rounds of your series' tag on danbooru, zerochan,megatokyo with the "official art" tag thrown in
or you know
buy the book
>>8397133
well if you decide you want to make it, here's a pattern but I bet you could experiment with tying and draping a T shirt as well
>>8397701
I always used stiff felt or needlepoint canvas for stuff like that. You just sandwich it in fabric and secure the bottom so it stands up.
>>8397715
this sounds perfect for Vita from Nanoha A's
>>8398594
trial and error

>>8402089
yea i was thinking a hinge would be the best way to go structurally. i was more confused on what sort of supplies would be the best to make a hinge out of??

>>8402363
its from dorohedoro!! this character's name is ebisu, i highly recommend reading it.

>>8403173
Did you try tao bao perhaps?

Does anybody know the particular name for these types of hats? The closest I can think of is a bucket hat. I'm planning to either make or order one for my son.

>>8402209
Yes. Just gotta find where to buy a white one.

>>8403375
Yo it's a white square. Just make it

>>8403069
Looks pretty good. Know a good place to order decent sizes of it?

>>8403399
Oh.. Thank you!

>>8403294
It's a pretty standard sunhat for children. Just take a pattern like this and mod it a little bit (so that the top half isn't as deep), add a trim for the base of the top, and you'll have the hat.

>>8403173
It's just a long teal straight wig?

http://www.ebay.com/itm/Women-Long-Straight-Neat-Bangs-Cosplay-Full-Hair-Wigs-/360503880929?pt=LH_DefaultDomain_0&var=630447353819&hash=item53efb4ace1

What is the best method to do a full body paint, and what paints would you recommend?

Also, any tips on how to make whatever the fuck kind of magic jotaro is wearing? Bonus points if it's kid friendly, in that a child will put up with it kind of way.

>>8403589
Magic hat specifically, the rest of the outfit is pretty simple

>>8403598
Jotaro has the weirdest hat hair combo thing going on. His hat and hair kind of just blend together. Part 4 Jotaro's contrast is weirder since his hat a d hair aren't the same color.

If you're doing part three. You can kind of cut opens and shred the back of a student cap and kind of blend the hat and wig together.

Also how old is the kid? I have a friend cosplaying Jotaro and was thinking of cosplaying Holly and dressing my son in a Japanese preschool uniform since he's really young(which is why I was asking about the hat here >>8403294 )

I thought it'd be cute to have him be a preschool Jotaro.

Is there a weapon master (or anybody who knows, really) lurking around that could tell me if a baseball bat is allowed at cons? I know most staff usually allows wood props but this is a real wood baseball bat and could possibly kill someone in the hands of a crazy weeaboo. I tried to contact the convention in question but nobody replied back and it's been a month.

>>8403069
Alcohol ink I'm curious about that. I'm only really familiar with oil and water based inks. Do you know a brand of this alcohol based ink I could check out?

>>8403622
just get a wiffle ball bat

Should I make Meiko's armor white or silver? I've seen it done both ways, and I'm torn.

>it's 2015 and I'm doing a vocaloid cosplay

>>8404146
silver. nothing about the armour suggests white.

>>8403589
I depends on what look you're trying to achieve. If its something where you're trying to be all one color, I would highly recommend that you try to find some way to use a zentai suit instead of using paint. If that's just not possible there's a number of ways you can achieve a full body color.

The best way would be to use airbrush. This will give you a uniform application and look the best. You'll need to get a compressor and airbrush guns, plus the paint you need (I think that ProAiir is pretty neat). This is the most expensive and most difficult way to do a full body paint (if you don't have the equipment or the knowledge of how to do it). ProAiir is very durable, and will last very well.

Next, you can use cake paint. Apply the paint with sponges (I use potter's sponges cut in half). There are lots of good paints on the market which include Wolfe FX, Diamond FX, Mehron (Paradise), Cameleon, and Kryolan (Aquacolor). There are other paints, but I'm not as familiar with them or they're not as effective as the ones I named.

You can also use PAX. PAX is acrylic craft paint mixed with Prosaide. You can buy it commercially or mix it yourself. I don't reccomend this method. Acrylic is non-toxic but not formulated to go on skin. If you use this please don't use it on your face. This stuff is a bitch to get off, often requiring rubbing alcohol which is extremely drying on your skin.

Whatever method you decide to do, it will look like shit if you just paint yourself one color (assuming that's what you're trying to do). You need to do highlights, shadows, muscle definition, etc. A full body paint will require hours of work, and you'll definitely need to enlist the help of your friends to get places you can't reach yourself. Whatever method you decide, learn how to seal your paint. You may need to get setting spray or powder. Test and practice your method before the day of the con. The more you practice the better your body paint will look.

Good luck.

>>8403407
Of plexiglass? She buys hers at Home Depot for pretty cheap along with her scorer.

>>8403752
It's Jacquard's Piñata ink. You can mix it to any color and buff it on. I guess it dyes more then plastic, but I've only used it for plexiglass. A cheaper alternative to buying precolored pieces

I haven't done anything for cosplay since before April and now I really want to get back to making stuff...Except I have no idea what cosplay I want to start or even if I want to cosplay. I just want to make stuff to help engage my brain and do something creative. Does anyone else ever get like this?

I'm at a loss for what to actually make if it isn't cosplay though lol.

>>8403611
2 years old, my plan was for him to run around cosplaying jotaro and to have me following him as star platinum

>>8404191
When doing full body paint, do you need to do muscle definition detail if you already have muscle definition?

>>8404263
Yes.

I'm assuming you're a guy. When you put make-up of any kind on, it sort of flattens your face (or other body features), which is why when we put on foundation, we also put on blush, bronzer, highlighers, etc. This will be true of full body paint too.

In pic related, the guy on the left has painted himself green. The guy is clearly muscular, but you can't make out some of the definition on his abs or chest, and it doesn't look nearly as dramatic as the contoured, muscle defined body paint on the right. So in order to look good, yes. you need it.

>>8404216
Thank you I'm totally trying this it looks fantastic.

I originally wanted to go the plexiglass route, but couldn't find any that was colored. So that is why I went and made an elaborate ass papercraft and hardened it with bondo to cast.

A Marvel specific question:

I'm going to cosplay Super Adaptoid, My idea is to have a bunch of "iconic" props. So far I have the idea of Captain America's Shield and Mjolnir (Thor's hammer). Which others do you guys think I should have?

>>8404559
You mean at a physical store? Because you can get pink acrylic from tap plastics or inventables onlinw

How much weathering is too much weathering before i start looking like a hobo on con grounds? Pic related is a travelling doctor/merchant but he tromps through swamps and forests all day. In the series his clothes look in decent shape but so does everyone else, even a girl who has been mired in a swamp for a week so that might be artistic decision.

How do I braid wefts? I know this sounds kind of stupid, but I've never done anything really complicated with wefts before. Do I stack them and braid like that or just braid using one layer of wefts? (If that makes sense.)

>>8404686
He's clean-shaven so I don't think it would be a problem. Muddy it up, good weathering is always a great finishing touch that makes everything look more realistic and unique.

So I bought a pair motorcycle pants like pic related. The leg is long on me so the knee joint is on my shin when I put them on.
Is it possible to have them made shorter from the knee up? If so what is that called? What should I be googleing or asking a seamstress about?

Thanks

>>8404800
Just take them to a tailor and explain that they're too long in the thigh, you don't have to know the terminology.

>>8404807
I think that would be best, don't want to risk ruining them. How much does that kind of alteration cost?

I need to paint a design on to silk (Its not as bad as it sounds I promise). Whats the best and cleanest way to do this?

>>8404819
look up silk painting kits if its a small area or a silk screen if its large

>>8404819
>>8398128

How do i go about making a koro sensei head? I've looked up deadmau5 head tutorials but theyre not exactly the same.
My best thought was covering a beach ball in plaster or something else and popping the ball, but i wouldnt know what to do about my vision.

>>8405083
Maybe look into a white mesh material and see through the teeth? Like you could make your costume taller in a way so the teeth sit in your field of vision.

>>8404631
Yea I usually shop online, but I live near a hardware store so if they'll have it for a reasonable price then may as well get it there.

>>8405083
Buy the official mask? It's like less than $30.

Let's see if anyone of you can come up with answer or suggestions:

My friend is going to Japan, Tokyo, and we thought that it would be cool to buy cosplay-costumes, hence, we have made our own costume for a last 8 years. Mainly we're looking for Iwatobi swim club jerseys (yeah yeah I know just stick with it). Do any of you know any decent cosplay-shops in Tokyo?

>>8405630
Do you want it new or secondhand? Do you want officially licensed cosplay or are you okay with Chinese, doujin circle-made, or amateur (self-made) pieces?

There are lots of places to get secondhand doujin/self/non-official pieces and it's about as legit as buying from Taobao (similar in quality as well). If you want official, buying online and having stuff shipped internationally is less effort than walking into a physical store.

Official sources include Cospa (Cospatio, GEE!Store) and Animate (ACOS). Cospatio will cost a pretty penny (~$400 for a uniform set) but highest quality stuff you can get. ACOS is manufactured in China and decent in quality, usually around $100-$150 for a set. Secondhand shops like K-BOOKS, Mandarake, or Mitsubado will have a mix of official and Chinese/circle/amateur costumes and pieces. You will need to spend time digging through their racks to find good deals and non-shitty costumes.

Please help I'm really stuck. What should I make the gold portions out of? I'm especially unsure about the tiara and neckpiece. Suggestions for the bracelets would be appreciated too.

>>8405630
>>8405660

Many of the shops are in akihabara, you can see the map here
http://otakumode.com/sp/visit_japan/akihabara/omotenashi

Also
http://tokyogirlsupdate.com/guide/akihabaras-cospatio

Is it possible to make bloomers without elastic? All the guides I'm looking at require elastic. I'm trying to make a pattern as accurately as possible, and it's a connected sweetheart top with a bloomer bottom.

However, the only way I can think of making it is by either making somehow drafting a pattern with the bottom portion being very large, or connecting the sweetheart top and bloomer bottom WITHOUT elastic. Any help would be appreciated. None of the patterns I see have a pumpkin flare on them at all.

>>8406025
These are not bloomers though, this is a onesie/romper.

>>8406025
Are you talking about the waitband or the leg holes of the bloomers? You can take the bloomer pattern and in contruction gather all the places that would require elastic to your measurements, making it fitted. If you mean waistband there would have to be a seam where the bloomers and top are connected. In my head i can see this looking nice if done cleanly :0

>>8406035
I know. That's why I was asking the question. None of the romper patterns I'm looking at come close. This is the closest I was able to find. I thought the easiest way to make what I'm trying to make is making a sweetheart top with elastic-less bloomers.

>>8406044
Yes I was talking about the waistband. Basically connecting the top and making an elastic-less waistband but I'm trying to avoid that. Something like picture related but with a sweetheart bust. I'm trying to wrap my head around trying to do it and how.

>>8406092
rompers don't have a waistband, i'm not entirely sure why you're asking about one. you have to cut it from a whole piece. your top image has princess seams while the bottom one doesn't, but has a defined chest piece. you'll either have to fit to your body shape or make it loose fitting.

>>8405660
>>8405930
Thank you! We'll keep an eye of them, whatever it's official or not. We just want jacket to try how it feels to wear pre-made and bought costumes.

Hi. I'm looking for a way to make a tail which will move realistically as I move around. I want it to give a "springey" feel?

>>8402601
>Off hand how much would it cost to get this made and be flexible?
Depends, Hard to say for sure. The flexible bit would be really hard to do, especially because of the weight at the end. I can't even begin to conceptualize it, but I'd say between 1-200 dollars.

>>8402742
It won't get banged up - acrylic is resilient as shit.

>>8403069
I dunno, to me that kinda looks like ass. Didn't even try to do any dimensionality at all.

Acrylic should be sculpted like folded paper.

>Do have a saw that could cut it though if you have any ideas on a source for plexiglass or acrylic sheets that isn't like a giant 100 dollar white board.
Just go to a home depot or something.

>That is what I was thinking about doing, but I don't know if the silicon halves will pull apart if they are going in a hole, assuming the seem is along the side of the blade. Unless the seam wasn't along the side of the blade, but rather between the guard and blade though that may be hard to do.
You're talking about a two part mold. Trust me, not worth the trouble. Especially if you're only do it once.

>>8403260
A drill and an axle. Really not that hard.

>>8405915
SINTRA
I
N
T
R
A

Worbla also works, but I'm not so familiar with it.

>>8406153
Check furry forums, they know their tails. REALLY fucking well.

I would love Salopettes as a casual thing; the problem in my eyes is the length of the garment (even the longest is too short for me).

Has anyone made their own salopette? Reason I asked is because I'm thinking about making my own; found the pattern to mod. What fabric would I use? Print? Etc?

What would be the simplest approach to this side-waistpack?
It's not an important accessory, but I still want to include it.

>>8406979
look up patterns for a drop leg ammo pouch and make it from leather

>>8407022
Finally, I know the name and can search for it
thanks a lot

help me
So when you order/commission a cosplay, and it comes with broken parts here and there and is the wrong size even though you gave them the right measurements... are you allowed to jew the seller for a refund or something else like that or do you just not tell the seller about it and make alterations yourself?

basically this is what happened to me
>order a cosplay from a pretty reputable seller
>they have a size chart, I'm pretty close to a size S (my waist is 24, size S waist is 25) so I order size S instead of custom because I dont want to pay more
>receive cosplay, the rest of the costume fits fine but the waist fits up to like a 28-29 which makes it HUGE on me
>some parts of the cosplay are also broken/falling apart

Any ideas on how I should go about making my Loki cosplay? Wheres a good place to start?
I can sew but never cosplayed before.

Sorry in advance for the stupid question but how do I finish the armholes on a sleeveless top?

>>8407059
Contact them and tell them that pieces are broken/falling apart. You can get a partial refund for that unless they offer to replace those parts.
As for the waist measurements, you can alter that yourself since it's not a big deal unless you want the seller to be responsible for it.

>>8407123
Hoe exactly do I alter it without a sewing machine?
Right now I've been using fashion tape to kind of hold it to make it tight.

>>8407067
Start with reference pictures. Loki has had hundreds of costumes, narrow done which one you like the best.

Break down the costume into smaller chunks. Identify what pieces you need, what you can buy, what you can make, what you'll need to commission.

Determine a budget. Stick to the budget.

Determine a timeline. Add another month to your timeline.

Start Googling. "How to make a cape." "Loki cosplay headdress." Look on cosplaytutorial.com. Find patterns that are close to what you need. Figure out where to buy what you need.

Come back here if you have specific questions. "What fabric do you recommend for a cape?" "Which wig looks better for Loki?" "What's the best lightweight material to sculpt horns out of?"

People here are willing to help, but they're not going hand hold you through the whole process. Do some research and come back with specific questions.

>>8407132
It really depends on what type of garment it is

>>8406276
Never heard of sintra. Will give it a try. I've never worked with worbla either but that shit's expensive.

Does anyone know where I could buy a good quality lavender wig for daily use?

>>8407228
length, style etc?

Hi, i have a question because i'm a male and i want to make a cosplay but i dont know. Genderbend Homura Akemi or KH 2 Sora? Who is better for anime convention? I think Sora KH 2 with keyblade but Homura Akemi genderbend to male version can be cool because Madoka is popular. Help me, please, i only want purchase one cosplay

>>8407585

It will be easier to purchase Akemi. Sora has a lot of parts, and can very easily get very expensive and/or very tacky. Akemi is more streamlined so you'll have a better chance of it looking ok if you purchase it, plus there are less pieces so it's better for your wallet.

>>8407615
The sad thing is where I'll buy the price is the same, so doubted, though I go out a little cheaper Homura because for Sora would need to buy the shoes and the keyblade, but I think the more popular character more people want to know and ask you pictures, and maybe genderbend Homura can't be know by people (sorry for my english)

>>8407151
think of it like a halter dress
I just used fashion tape to kind of tape the back side tighter lol
kill me now

>>8407585
Akemi because KH2 Sora will require you to commission someone very experienced to make a nice wig, prop, and costume. And even if everything is on point there is a high chance you'll only look marginally better than all the other manlets that cosplay Sora and drop like $100 on a shitty chinese costume.

At least with Akemi you can still look decent with buying something from taobao or from online.

>>8407116
Make facings.

Do you think bangs would suit me and if so do you think I can squeeze in a hime cut?

>>8407867
>Straight across bangs

>>8407867
From what I can see yeah they will suit you.
No hime cut, though.

Can anyone recommend a show with 1700's costumes? I'm all out of shows to watch and I have a mighty craving for cravats.

>>8407880
My top concern was that my hair was too short and I'd end up looking like coconut head

>>8407902

Apparently the actor still has that wig.

>>8407902
Well, if you're really that worried, you can always wait a little while for the back and sides to grow out.
But tbh, I think a hairstyle like that can look cute on a girl, specially since it won't be as rounded as his.

I don't know if this goes in this thread but the other question thread has a lot of replies and will probably auto sage soon so I'm gonna ask about this here:

I am really in love with the newest Angelic Pretty print but I have only just now started buying lolita dresses. I've never used an SS before and I want to be first in line to get that new print, to at least get the tights. I assume I'd have to contact an SS as soon as possible to pre-order them. You can do that, right?
How do I do that?

>>8407960
Your question should go in the Lolita general thread at least: >>8403877

And all you need is a forwarder since you can buy with credit/debit card from Angelic Pretty online. Now if your Japanese is awful and you need a proxy to hold your hand through this, then yes, you should contact someone sooner than later.

>>8407932

I definitely could but I'm so impatient. If by the time I'm done cutting it and the thread is still up I'll post the results.

>>8407969
I don't post my noob questions in that thread cause they get all pissy about it.
Where do I get a forwarder?

Hi guys! I want to make this cosplay but i need some references because is new from yesterday

Let me know if this isn't ok here...
How do I make cosplay friends? I try to talk to people at conventions and whatnot but usually end up spaghetti-ing or don't ask for contact or something.
I really want girls/possibly guys to hang out with at cons with and do group and partner cosplays. Pls help ;-;

>>8407981
Check /a/'s Buyf/a/g guide. It has a list. Bottom line is different forwarders/proxies will work best for different people. You should check out at least a handful and pick the one that best suits your needs and location.

>>8407998
Ask again in a few more years. I'm sure there will be a lot more reference images then.

>>8405915
kek

>>8408011
What? Why not now? I see a lot of cosplays from unreleased games

>>8408041
Those characters probably have more existing reference images. You're asking us to pull pics out of nowhere.
Also: chill. The game isn't out yet. If you're the first to cosplay something usually you're the first to cosplay it poorly.

>>8408041
If you really are serious about the cosplay, you should be able to find at least some reference pictures on your own (from the trailer, promo images, official website/channel backgrounds). Asking for opinions on specifics, like "what fabric does this on his outfit look like" while showing the images you've already collected, would be much better questions.
If you're too lazy to look for reference images to get started, I'd rather not help along a bad cosplay that is only being done for the sake of hype and FIRST.

Do you guys have any recommendations for tea length petticoats?? pic related

Hey guys, so I really want to cosplay a character that has a buzzcut, kinda like pic related. Could it even be possible to fake it decently if I have long hair (boob lenght) and I don't want to cut it?

Alright /cgl/ I've been Cosplaying for a while now but I always have the worst ways going about things. I'm planning on going to cosplay Hestia for a beach meet up and I'm concerned about how I'm going to keep the oppai ribbon wrapped around me with out falling down or restricting my arm movements. I'm kind of leaning of the idea of keeping the ribbon a bit loose and either use hot glue or super glue on each am to keep the ribbon from falling. What do you think?

I have dimples but the character I am cosplaying doesn't. Is there some way to cover them up because I don't want to not smile all day but my dimples are so deep they look like cheek-stab-wounds when I smile aby ideas how to fix this aside from scowling all day?

Out of curiosity, for people without dimples cosplaying a character with dimples what would you do? Some weird contouring or something?

>>8408709
....you can't hot glue something to your skin

>>8408709
If you must use adhesive, please use a skin safe adhesive like spirit gum. Please don't use hot glue or super glue.

>>8408709
Sew to bodice in the front. Use spirit gum or sock glue for attachment to skin and add transparent elastic straps for the arms.

>>8404723
Bumping my own question.

>>8408709
Buy this and use it for the ribbon
http://www.amazon.com/gp/aw/d/B00OX72FDQ/ref=pd_aw_sim_201_3?refRID=0AB0FC68KSGKNB82144E
Sew it into place on the bust of your dress.

I was wondering if anyone ever tried out fake boobs like these. I've been following her tutorial but it's not very complete. Also, I've never seen this up close, do they pass as somewhat realistic boobs or they only look nice in photos?

Anyone have experience with the ratuken used lolita store Tokyo Alice? Their prices seem almost too good to be true and I'm scared of ordering.

>>8409450
The prices are on par with auctions if not a little more.

>>8409483
They have 2 gloria jsks for under 200. I thought it went for way more

has anybody bought from EZcosplay? i want to cosplay a girl from a new anime but i dont know how to sew and this is the only site i can find that offers Chess Belle from Seraph of the End.
the only problem is that there are o stock images of the costume yet because its so new (im assuming)
can somebody give me a review of the website or help me find a more reputable seller?

>>8409449
Havent seen it irl but finally managed to see pics where it was obvious

Tbh the way this outfit is designed its totally possible for anyone with any amount of boob to accomplish the underboob, you just gotta be creative about it (breast lift tape would be involved im thinking)

Ive never given much a shit about tit-size accuracy myself

What kind of material should I use for Mako's top base/the white shirt? I need it to be breathable but also want it to look loose like hers. Everything I've found is either too stiff or see through.

>>8409551
the shirts from real uniforms are actually a bit see through. you're supposed to wear a tank top or t-shirt underneath. Asia uses undershirts so they can go longer without cleaning their clothing.

>>8407274
Long with straight bangs.

has anyone got any suggestions for making a foo fighters (jjba) cosplay with out there being a middle seam (aka making a pair of trousers and a top and sewing it together) ?
I was sort of going to make a really simple trouser pattern and just extend it upwards but then I realised there'd be a big seam up the middle since I only know how to make four piece basic trousers, and all the foo fighters I've seen just look like a two piece pattern+ some straps

also I've tried looking at hanyaan's tut and as much as I love her I can't do word only tutorials

>>8409064
Yes you can, hot glue will eventually dry.

>>8409551
The bodyline fuku is great and thick enough to not need an undershirt. The color is correct too

>>8410055
Have you ever burnt your finger while hot gluing something? Why the fuck would you intentionally do that

What would I use for the inside of a large hat brim like pic related? I'd like to be able to wash it and possibly stand up to some light abuse in case I fall down or it gets shoved into a suitcase or something, but I can understand if that's not feasible.

Not really sure where this question belongs but I figured help thread was a decent bet. I really want to buy some things from Supergroupies, but I don't know what kind of shopping services are reliable. Suggestions would be really appreciated.

>>8409551
Shirting or shirting poplin (may be the same thing in some stores). Wear a cream or skin-toned camisole underneath to prevent your bra from showing through and to wick sweat/makeup from your body.

>>8410313
Copy & paste, but-

All you need is a forwarder since you can buy with credit card from them. VISA debit card is discouraged by the site. Now if your Japanese is awful and you need a proxy to hold your hand through this, then you should contact someone sooner than later. For a list of forwarders/proxies (shopping services), you can check /a/'s Buyf/a/g guide. Bottom line is different forwarders/proxies will work best for different people. You should check out at least a handful and pick the one that best suits your needs and location.

I was thinking of buying some horsehair braid to make a circle skirt for a cosplay - would a wider width be recommended, or does it not matter? Like, would I be able to achieve pic related with a thinner horsehair braid, or should I just go with the wide one? Thanks!

>>8410310
>cosplaying BHL
My dear companion of African origin.

Buckram is what you are looking for. The outer material looks like it could be a suede or something similar.

>>8410439
Do I need to do anything special with it to make it stiff, or can I just sandwich it between the cloth I'm using?

>>8410438
If you're aiming for pic-related ruffles, I'd go with wider braid. I have 1" braid at home and I don't think I'd be successful if I tried using it; it's more suited for giving definition to the bottom of skirts. For giant ruffles like in your pic, the skirt fabric would probably be too heavy, especially since you'll need so much more fabric for all that ruffle.

>>8410457
Alright then, thanks so much for the reply! Do you think 1.2" braid would be good, or should I just go for the 2" braid?

>>8410456
I would go with a wired edge around the brim, but otherwise just sandwiching it should be fine.

Can someone help me because I'm apparently severely retarded when it comes to making shapes.
How the fuck do I make those pointed sticking out sections on his arms? I'm using eva foam and worbla, but can't seem to figure out what flat shape to start with, or how large/deep the notches should be to have it not be a mess.

Can someone throw a good tutorial at me or mspaint it or something?

>>8409444
>>8409420
>>8409133
>>8409064
Why not just loop the ribbon around the arms? Use a tan strip to hide the loop.

>>8410265
>apply hot glue to the inside of the ribbon
>let It cool down enough to not totally burn but it will still stick to my skin
>Probably will still burn bit a but just man it up.

I'm a little lost as to how to make this skirt. It kinda looks like it's a pleated skirt, but I was planning on embroidering the flowers onto the fabric so pleated might not be a good idea. What kind of skirt should I make for this? Fabric suggestions would be appreciated as well.

>>8411525
That sounds painful to remove. If you don't have spirit gum, I've found that eyelash adhesive works.

I was wondering if any one could give me tips on a pattern (i've never made one before) I'm making armor for a ren faire i heard tracing around a well fitting t-shirt and adjusting the length works, must mostly i wanted to know if what i have drawn out here will work?

Oh man I feel like this is such a newb question, but I've never had to actually sew anything for cosplay (I usually make armour and modify existing things).

Is there anywhere I can find free patterns? I need a dress like pic related, and the frugal side of me doesn't want to spend ~20$ on a pattern I'll only use once.

>>8411593
Also her jacket- is there a specific name for the style? I spend a considerable amount of time looking under "coral blazer" on Amazon and Ebay last night but everything I found was too thick, too long (though that can be fixed), 3/4 sleeve, or the collar was too low.

>>8411593
>what is google?

$20 for a pattern? HA.

I don't know about you, but I never pay over $10. I buy from Joann's when they're on sale, or from the New Look devision of simplicity.

>>8411599
>what is google
The place I was finding patterns for 15-20$, lol.

The most accurate pattern Joanns has is 16.50, that was like the first place I looked.

But yeah New Look has a pretty good selection, thanks.

>Now to figure out which one to use. Oh man I'm so bad at this.

>>8411610
Subscribe to Joanns mailer and find out when they have $1-5 pattern sales. Also if you have the brand and number a lot are on eBay or etsy for $5-8

>>8411557
I'm going for something a bit like this btw, except longer (mid calf) and buttoned up the front

since im not sure where this should be posted, I opted for here. Does anyone know where I can find plus-sized friendly lolita blouses?

I really wanna put together a andre (prison highschool )cosplay for ax. I have no idea how to pull off his head though. Paper mache?
Ita so rotund and his face is so small.
I need something that i can see out of . I w a thinkibg of pairing that with a generic bought jail outfit
(First timer)
need tips

Does anyone know where to get good compression dance tights?

>>8411812
Dance stores. Bloch and Capezio are probably the best known companies, but for dance tights its important you get something close to your skin tone, so get whatever looks best.

>>8408000
Find out if there are any meet ups in your area?
Normally there are groups in main cities so if you live far out it may be difficult, but if you just have a look on facebook for groups in your area and see if there are any meet ups coming up you could go to you should be fine.
Even if you just go to a lolita comm and ask people there if they know of any cosplay groups maybe?

I'm in a bind.
I have absolutely no idea what fabric to use for Cloud. My local Joanns has nothing that looks remotely close and if I cant find something i'm going to have to chop the arms off a turtleneck sweater and hope i can find some fabric that is similar in color too it for the pants.

So /cgl/ what fabrics would you use to make a Cloud Strife costume? Mainly the top but if you have suggestions for the pants that'd be great.
Thanks in advance

Soon I'm going to cosplay a vampire and I want to wear fake fangs but I'm worried that my real messed up teeth fangs will make it look weird. Obviously I can't wear fake fangs on the designated teeth (canine) because they're jacked up. So should I try and put them on the teeth before my canines or just forget about fake fangs and use my real ones?
I'm worried that two pair of fangs might look weird but I'm also worried that my real fangs arnt the right kind for a vampire they're more for trolls.

Pic related my natural smile

>>8411858
cute fangs

>>8411858
You could try the small Scarecrow fangs. Those may work for you.

>>8411858

Unless you are bothered by accuracy to your source material, you can have four fangs - vampires are portrayed very differently across media and Interview with the Vampire did them like that.

>>8411858
your teeth are really cute anon!!

>>8411634
Seconding Ebay, Etsy has amazing selection but is often overpriced. My usual strategy is:
>google "<name of item> sewing pattern"
>look through google images for one that looks good
>it's usually on an etsy listing. copy the pattern number from the listing
>paste into ebay search bar
>get pattern for $2-6 instead of $8-20

So I never cosplayed before, but I feel like I want to try for next years anime convention when it rolls around. But having no skills relating to cosplaying I'm not sure where to begin, so I thought I might try to start at something that looks a little simple, and the first thing I thought of was Yang from RWBY, but being a dude I can't rock the bike shorts or cleavage window like she can. I can get a general idea of where to begin with this, and I got an entire year so I have plenty of time to make mistakes and learn if anything, though I am a little torn trying to do her original outfit or her new outfit.

Though I do like her outfit more then the original but I'm not sure how I would genderbend that one

Would a dark purple wig in gothic lolita be considered it a? Its pretty nice and is just straight with bangs. Looks like pic related, but straighter.

how do i this guy

>>8412144

Dont be a lazy faggot crybaby
Come back when you have some of it started we're not here to hold your hand
Dont act retarded and sperg on people and expect them to help

Good luck with that.

>>8412218
>>8407145
Replace Loki with Mad Max.

>>8412220
Meant to reply to >>8412144

>>8412134

It should be fine if the colour matches and so long as its not shiny or plastic looking

>Really likes purple goth cords

>>8412107
no one wants to see your gross ass hairy manchest or legs. Pick a man to cosplay, or be prepared to be the laughing stock of the next bad cosplay thread.

>>8412220

Kek

>>8412107
>>8412227

It depends on how anons body shape is. Yang can be pulled off by a dude IMO, provided ones willing to wax and learn makeup to soften facial features

We need more information on how your body looks anon.

>>8412234
>>8412227
I don't plan on wearing a skirt or anything. I even said I can't wear them, I plan on doing a genderbend of the costume so I'll wear jeans

Hey 'gulls I have a wig question. I'm going to be working on Young Greg from Steven Universe pretty soon (older Greg is already in progress since a friend is kindly donating his Greg wig to me) and I have no idea where to start on the wig. So far I'm leaning toward Arda's Jareth long in Chocolate. Should I bother buying two wigs or just get one and buy wefts? I did that with my Amethyst wig and it seemed to work out. Do you guys have any other suggestions for wigs? I want to make sure I get enough volume without having a wig that slips off from the weight.

What size circle skirt would I need to make something like this?

>>8412492
Whoops, I meant to add it's for Anemone.

>>8409055
bumping my question

How would you guys suggest patterning the white shoulder.. things? Front and back. ;_;

I want to cosplay as Teddie. Is there anywhere I can get UTK socks without raschel lace for a reasonable price (no burando), or should I just go for the slightly gross Bodyline ones?

Who are some characters that are fit/in shape rather than just skinny?

what brand of fashion tape does /cgl/ like?

>>8410438
The wider the braid the more poof you'll get, but if you go with a heavier fabric like casa satin then you will get very defined gathers/pleats. Here's a pic of my experiences with 3" braid. The muslin looks bad because I pinned it on and didn't sew it down or anything, but I wanted to highlight the difference between using it on a heavy/lightweight fabric.

>>8411842
Top fabric's called rib knit fabric. Never made pants so I don't have any suggestions, sorry.

Anyone know of a good place to buy custom printed body suits? I need one with a kevlar pattern but i can't seem to find one anywhere.

>>8412578

Target has white knee socks, you could grab those and attach your own lace.

>>8407653
>Maybe genderbend Homura can't be know by people.

Are you nuts? Most people know what Madoka is. If you really want to stand out make sure to have everything Akemi has from the show and made a gender bend Madoka doll too. Seriously I'm with the other anons, it would be cheaper to do Homura because you would end up buying a Keyblade which would cost 100-200 dollars easy and do the spiky wig which would cost 50-100 dollars not including the outfit.

>>8409497
Did you try Cosplay House too? I heard they were pretty good.

>>8412578
Taobao sells UTK socks too.

>>8412672
>Look in any battle shonen jump manga
>Attack on Titan, World Trigger, Black Clover
>????
>Profit

Seriously anon check out animedatabase via google. If you want a video game character try Street Fighter, King of Fighters, Blazblue, etc.

>>8398594
The cap is actually a hooded cloak, pulled to the side and over the shoulder. The drape will fall naturally, but it might take some fiddling. Try attaching it to your tunic via some snaps so it stays in place.

>>8399678
Use insulation foam, but make a lattice on the inside with wooden dowels, and sandwich the form with the foam. Any large prop will be heavy, but that's what I'd recommend.

>>8401387
Use a strap of elastic, and go between your lower lip and your chin, and set it tight. Now attach this to the sides of the jaw. set two more straps attached to that one (AND I MEAN TIGHT) to the front of the jaw. When set with a hinge, the mouth will flap open and closed.

>>8404146
The armour should be a mirror polished silver, think mithril.

>>8404723
It depends on the thickness and what you're using it for, hon.

>>8406153
Use a core thats segmented, and then attach the tail to your body using fishing wire. Swish swish yiff yiff yiff.

>>8406423
It depends on how casual. I find most salopettes fall above the knee.

>>8407585
It depends on how masculine you are whether either of these will flatter you.

>>8407998
Don't cosplay from something until it comes out. There may be final changes to the concept and you'll look silly.

>>8408079
Hoopskirt under a bridal petticoat.

>>8409497
Have you considered commissioning someone?

>>8410895
...pointed? its just the armor?

>>8411535
Unrelated, sorry, but that skirt really reminds me of Yuna from FFX.

>>8412244
this really reminds me of Arda's Jareth. You might start there.

>>8412492
We don't know your measurements to determine that, hon.

>>8412571
...Do you mean her cape?

>>8412672
Not her, that's for sure. How about Commander Shepard?

>>8406272
1-200 dollars? Thanks. I might see if I can get it commissioned maybe since I'm not sure if I can make it or not as a beginner.

>>8412854
Sorry, I can't clarify for shit. I was wondering if full or half circle skirt would give me a large enough circumference to get a look like that if I made a hoop thing to stick in the end. If it helps, my waist is 29in? But yeah, I don't want to cut a skirt that's too small and end up with shit.

>>8411816
How about danskin?

>>8412571
2 X front pieces + collar piece + 2 X back pieces

Cut each on both white and pink light- to mediumweight weight fabric of your choice. Work from a basic tunic w/collar pattern base if you're not sure how to make the pattern.

>>8412780
Thanks for pointing me in the right direction. I'll look around for it tomorrow

Fuck. Got a dance belt for under a body suit, and you can still see the outline of my dick a little bit.

H-how do i fix this? Can i stick something padded inside the dance belt to buffer it a little more or something?

>>8413148
What kind of dancebelt did you get? Thong or full seat?

>>8413170
full seat

>>8412964
Also fine.

What would be the best material to make the heel out of so it's safe to walk on?

>>8412854
[braid anon] Really, something just like in that picture. I'm going to be wrapping the braid around the base of a bun (like Arda's braid bun)

I've been helping some friends with costumes for a few months and they keep telling me to do one for myself. I don't look like I'd be anyone...if that makes sense? Unless you count people mistaking your for Serj Tankian.

So, I was looking for suggestions of background type characters that anyone could "pull off". The best so far that I've come up with is pic related but it's kind of old/irrelevant/I don't think anyone will recognize what it is.

>>8413664
If you're worried you won't be recognized, then go post in the suggestions thread (>>8361955) and get some other ideas.

But honestly it kind of comes down to why you're cosplaying. Are you doing it because you like the character you're portraying or because you want to be recognized? If you just like the character then it doesn't matter, you'll make someone's day when they recognize you.

>>8413533
Plastic. Wood if you're cheap. Wear a dust mask.

>>8413533
Just make a heel cover for a pair of stilettos.

>>8413669
Thanks, I didn't know there was a place for that. I appreciate it. As for your reasoning, I think you're on to something.

>>8413680
No problem. Make sure you follow the rules of that thread (You've got to make some suggestions before you'll get some suggestions). Best of luck finding someone to cosplay.

>>8412758
Oh wow, thank you so much for the detailed pictures! I really appreciate it!

>>8413336
Okay, then there is an option, but it can be a little uncomfortable at first. You'll want to tuck down as much as you can. Most dancebelts of course instruct you to pull upwards, but if there is still a bulge there, then tucking down will hide that.

does anyone know how to shape eyebrows for your face? I'm rlly not liking mine rn. They're giving the tumblr eyebrow vibe. maybe they're too square? this is the best pic I have of them. help :-(

>>8414019
They are too thick at the centre of the face. You need to pluck them back a bit and make them thinner.

Need help finding key words for some inspo. Does anyone know
1. What the exposed laces on the crotch of baseball uniforms is called?
2. The flared knee/hips in pants of say Canadian Mountees or WW2 military uniforms.

>>8414019
Why don't you try going to a brow bar at sephora or ulta?

>>8412889
First you need to determine the angle at which you want the slope to be, as well how much leg you want to show. I'd recommend making a mockup so that you find what fits you perfectly. Mark your leg where you want the skirt to end, then hang the hop by string/twine from your desired waist area. You can determine the slop and everything by the lengths of string.

>>8413561
Sew the wefts in pointing the direction that you want the braid to start. i'd recommend somewhere here, like pic related. Then braid along the edge of the bun and pin or sew it in place where you need the braid to end. tuck the excess hair into the bun. Can I see a picture of the character so I know how specifically the wefts should be attached?

I have a pair of gold Tea parties that I don't like the colour of, is there any way to change it without the paint cracking or anything?

>>8414483
Try a wash of either fabric or acrylic paint, then spray over it with waterproof spray.

Anyone know the taobao terms for this specific watch? I tried 手表 but I couldn't find a watch similar to picture related.

Hey there.
I'm doing my first sailor moon cosplay in August.
and I'm having a dilemma with the shoes.

I could either buy a pair of red boots and alter it myself. or buy pre made cosplay shoes.

The stilettos are the cheapest option (around $30 with shipping), and would help the fact that I'm waaaaay to fucking short to cosplay sailor moon in the first play. (I'm 5'0 and she looks like she 6'5 for christs sake.)
But they look extremely slutty and the front of the heel just doesn't look accurate. so. eh.

The gogo boots are around $40 which is also another option, I'm just not a fan of the chunky looking heels.

and the third option would to be to drop anywhere from 60-80$ on pre made cosplay boots. My apprehension with this is that I will scammed or they won't come on time. Everyone selling them "custom" makes them and uhg that just doesn't sound trust worthy ya know?

any opinions would be appreciated. and alternative options would be even better.

So I want to do Yang for next year as the cosplay I want to do, but I'm a dude so I'm not gonna wear a skirt or thigh high stocking.

How can I make this outfit more male friendly? Should I go with some kind of dress slacks for the pants?

The thread is saging, but what would a good color be for Mutsuki's dress? For reference his hair is dark green.

How do I make fluffy spikes like pic related? I'm trying but I just manage to make them too spiky.
Any help is appreciated!

I'm going to attempt to cosplay the person in this picture but I cannot for the life of me find a similar jacket. I know little old ladies wear these crinkly type of jackets sometimes. What is this type of jacket called?

I'm buying two short clip in ponytails that don't come with a base wig. Is the length of the pictured wig alright as a base or will it look strange?

I'm not sure if I am okay with the wig I got. Or if any wig would be any better.

What's the best way to paint on spandex?

I have a zentai that needs a design painted on it, but I have no idea how to do that without either creating hard patches, or the design being stretched beyond recognition.

>>8414019
They are a little too thick at the center of your face. Just make them a little thinner because I don't think thin brows would suit you. You are a cutie pie btw

>>8412780
Is there any other fabric that you could think of? I found some ribbed knit but the lines are not nearly prominent enough. It looks like any other apparel fabric

>>8400773
thanks man! sorry I haven't been browsing cgl for the past couple of day. Really appreciate it~

>>8414847
Black.
>Not doing normal version.
Why not.

Hey /cgl/. What is going on with Rinka's red headpiece? Is it fur, feathers, more hair?? I'm looking for material suggestions because I'm at a loss.

>>8416144
Looks like a hanya mask with hair of some sort

>>8415536
It's a sleeveless sweater. You'll get better detailed reference images from the soldier uniforms in Crisis Core.

>>8416144
To me it looks like the red is more hair but it's attached to the mask. I don't want to be /that/ person but it would be a lot easier to figure out the details on everything if you wait for more pictures to come out.

I'm trying to find a name for a type of dress/top that is essentially a circle of fabric, folded in half, with a neck hole and either stitching or a belt to make the sleeves and torso separate but is otherwise uncut. Does anyone know wtf this is called?

>>8416897
I can't really visualize your description but are you talking about pic related? If so the style is called babydoll

>>8416903
No not a babydoll. Apparently I was wrong in how its made though so (I was describing a "tablecloth dress" from the 70s). Pic related, I want this. Does it have a name? Is there a pattern or a place to buy one?

>>8416970
This looks to be a poncho dress of sorts.
Or possibly a modernised sack back dress.

I would personally make a plain, tight fitting dress with sleeves to the desired length. Alter the pattern so that the sleeve seam runs along the top of the shoulder. Take the "cape" part of the fabric and sew it into this plus along the back of the neck of the dress.
Tada. You will look like an overgrown bat.

Does this costume look store-bought or self-made to you?

I fell in love with it and I don't think I could make it any better, so I was trying to browse Taobao to find it, but it's no use if it wasn't bought...

>>8400295
Seriously, anyone that could answer this?

>>8415897
I have boobs, anon. And I don't have Mutsuki's fiction-tier binding abilities.