[ 3 / biz / cgl / ck / diy / fa / ic / jp / lit / sci / vr / vt ] [ index / top / reports ] [ become a patron ] [ status ]
2023-11: Warosu is now out of extended maintenance.

/3/ - 3DCG

View post   
File: 111 KB, 628x472, COREDRILL_display_large_preview_featured.jpg [View same] [iqdb] [saucenao] [google]
433205 No.433205 [Reply] [Original]

ok guys, i just got a box on my porch this morning, it was my new 3d printer, i have some experience with 3d models. not much tho, i was able to calibrate it fine, and load the software fine, and looked thru thingiverse fine, got my file, loaded it, and the print started fine, obviously there was an issue. the issue being this printer has issues going from straight up surfaces to a horiztontal surface, this was an underneath surface, it failed, so the past couple hours have been me trying to learn more abou 3d models to fix my issue, im failing and i would like the request of someone who knows theyre stuff! this is where you guys come in, my request is simple, i need a single part of a 3d model cut off, and thats all. i lack the software and the knowhow to do it, and i know this is a SUPER simple thing for one of you, heres the link to the file i would like edited, and the image here is what id like removed. Can someone please help me so i can make my first print without fail! (and costing me $ this filament is pricey) I need the file to STAY .stl and be leveled, u guys know what Im talking about. Thanks in advance! I will totally post a picture here of the successful print once its done! it says 2 hours ish for my .2mm print speed. Again thanks in advance.

File I Want Used:
http://www.thingiverse.com/thing:21730

If someone doesnt mind doing this awesome favor for me that would rock, when you got it done, let me know if theres a place you can upload it for me from? maybe a link? however you wanna do it, i look forward to it.
-HumbleAnon

>> No.433208

Thought of someone also. both pieces need to be flat on the same level, so the printer prints them both on the flat surface, thanks again if someone can hook me up with this. again i know to someone out there this is uber simple.

>> No.433226

Sorry dude but you need to learn the quirks of your printer. Unless you bought a $2000+ machine, and really even then, each one needs lots of personal tweaks to get it running. Since you've never used one before it could take a few days or weeks to iron out the bugs.

Your first few prints won't be good but will get better and better. Im using a crispy printrbot I got second hand and it took me several prints to get it to the point where I can start a job and leave it with the knowledge it will print how it is supposed to.

Download some calibration .stl's and don't skimp on the filament.

Good luck.

>> No.433227

>>433205
fixed it for you

removed the keg, filled the holes and removed some of the floating geometry. The drill is really poorly modelled tbh.

freeuploadsite.com/do.php?id=47746

you're welcome

>> No.433228

>>433227
also made the two objects seperate files

>> No.433229

>>433205
>i have some experience with 3d models. not much tho,
>not much tho,
>not much tho,
>buys 3dprinter
>asks /3/ for help
Wasted money on a doomed attempt.

>> No.433230

>>433227
top keg

>> No.433231

>>433205
>(and costing me $ this filament is pricey)

That's why you feed it through the other machine to recycle it.
Don't tell me your enough of a moron to to buy a filament extruder as well?

>> No.433252

>>433227
your the man dude, thanks for not being a condoning prick like the rest of these nabs, they were like me at one point too, and ill bet someon gave them shit too, it rolls downhill ya know?

>> No.433329

>>433252
>>Condoning

>> No.433360
File: 34 KB, 960x720, 1937449_971879556171725_2036634012169546149_n.jpg [View same] [iqdb] [saucenao] [google]
433360

>>433205
As promised, final result, thanks for the help good sir.

>> No.433373

>>433360
nice buttplug u got there

>> No.433374

>>433360
>small, fat hands

>> No.433381

>>433360
neat!

>> No.433390

>>433360
blurry pic but still shows vinyl-record-texture and... how the hell did you get warped uneven surfaces?

>> No.433397

>>433360
glad to be able to help someone out.

>> No.433406

>>433360
holy shit that's cool. how much was your printer?

>> No.433534

>>433374
im 6'4" and 250 theres nothing small about me, anyways, wtf do my hands have to do with a 3d model? if u guys wanna troll go do it somewhere where youll get the reaction you, u wont get it here or from me :)

>> No.433540

>>433534
>im 6'4" and 250 theres nothing small about me, anyways, wtf do my hands have to do with a 3d model? i

You're incredibly overweight. Also, you have small hands and fingernails and we all know what that means.

>> No.435935

>>433534
>butthurt reaction, obviously typed with salty tears streaming down your face
>u wont get it here or from me :)
how retarded are you

>> No.436021

>>435935
>bumping a 16 day old thread